manualshive.com logo in svg

KAESER M 64, Руководство оператора, Страница: 117 / 344

Поделиться
Скачать
KAESER M 64 Скачать руководство пользователя страница 117

10.3.3  Fuel system maintenance

Make sure no dirt enters the fuel system during maintenance. Clean components and their sur‐

roundings before dismounting.

Material Spare parts

Oil receptacle
Cleaning cloths

Precondition The machine is switched off.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 bar.
The machine has cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.

DANGER

Danger of fire from spontaneous ignition of fuel!

Serious injury or death could result from the ignition and combustion of fuel.
➤ Allow no open flames or sparks at the place of use.
➤ Ensure that the maximum ambient temperature is not exceeded at the place of use.
➤ Stop the engine.
➤ Wipe up escaped fuel.
➤ Keep fuel away from hot machine parts.

Fig. 38 Fuel system maintenance

1

Fuel pump

2

Fuel prefilter

3

Fuel water separator

4

Fuel strainer

5

Fuel tank

6

Fuel micro-filter

➤ Open the right-hand access door.

10 Maintenance

10.3 Engine maintenance

No.: 9_5898 26  E

Operator manual    Portable compressor   
M 64  

105

RAMIRENT

Содержание M 64

























































































































































































































































































































































Отзывы:

Нет отзывов