Kaco blueplanet 40.0 TL3, Инструкция по эксплуатации, Страница: 35 / 52

Configuration and Operation
Installation Instructions KACO blueplanet 32.0 TL3 / 40.0 TL3 / 50.0 TL3 Page 35
Menu
level
Display/settings Action in this menu/meaning
US-277
0 1 2 3 1
Activate FRT
The inverter supports dynamic grid stabilisation (Fault
Ride-Through) in accordance with the BDEW Medium
Voltage Directive.
- Specify constant k.
- Specify the dead band.
- Activate or deactivate FRT.
US-277
0 1 2 3 1
Reactive power

Open the menu: Press the right arrow button or the OK button.

Activating reactive power process: select process and press OK. The
active process is highlighted.
US-277
0 1 2 3 2
cos-phi const.

Confi gure power factor.

If a power factor not equal to 1 is selected: Select the type of phase
shift (under-excited / over-excited).
Q const.

Set the reactive power Q (in %) to a fi xed value.

Select the type of phase shift (under-excited / over-excited).
cos-phi(P / Pn)

Open the menu: Press the right arrow button or the OK button.
US-277
0 1 2 3 3
Number of
nodes
This option defi nes how many support node can be defi ned in the sub-
sequent menu.

up to 10 support nodes can be defi ned

Specify the number of support nodes for the reactive power charac-
teristic curve.
1., 2. ...node

Specify the power factor for the 1st, 2nd (etc.) support nodes

If a power factor not equal to 1 is selected: Select the type of phase
shift (under-excited / over-excited).
US-277
0 1 2 3 2
Q(U) characteristic

Specify the target voltage.

Specify slope.

Specify change time.
0 1 2 3 0 “Information” menu

Open the menu: Press the right arrow key or
the OK key.
0 1 2 3 1 Inverter type Displays the type designation of the inverter.
0 1 2 3 1 SW version Displays the installed software version.
0 1 2 3 1 Serial number Displays the serial number of the inverter.
0 1 2 3 1 Display country
Displays the selected country setting.
Optional: Displays the grid type if a grid type has been selected.
0 1 2 3 0 “Vendor” menu » The display shows information about the unit manufacturer.