Kaco blueplanet 40.0 TL3, Инструкция по эксплуатации

Страница: 33 / 52

Configuration and Operation
Installation Instructions KACO blueplanet 32.0 TL3 / 40.0 TL3 / 50.0 TL3 Page 33
Menu
level
Display/settings Action in this menu/meaning
0 1 2
3
1 Display

Confi gure the contrast setting for the display.

Set the length of time without user input after which the backlight-
ing of the LCD switches off .

Alternatively: Permanently activate or deactivate backlighting by
selecting “On” or “Off ”.
0 1 2 3 1 Date & time

Set the time and date.
NOTICE: For self-diagnostic purposes, the inverter carries out a daily
restart at midnight. To avoid having a restart occur during feed-in
operation and to always obtain reliable log data, ensure that the time is
correctly set.
4 1 2 3 1 Network

Open the menu: Press the right arrow button or the OK button.
4 1 2 3 2 DHCP
Activate or deactivate DHCP.

On: Activate DHCP. Once the DHCP server becomes available, the IP
address, subnet mask, gateway and DNS server are automatically
applied and the aforementioned menu items are hidden.

Off : DHCP deactivated, make settings manually.
4 1 2 3 2 IP address

Allocate a unique IPv4 address in the network.
4 1 2
3
2 Subnet mask

Allocate a network mask
4 1 2 3 2 Gateway

Enter IPv4 address of gateway.
4 1 2 3 2 DNS server

Enter IPv4 address of DNS server.
0 1 2 3 1 Web server
Activate or deactivate Webserver.

On (Default Status): Activate Webserver.
Defi ne a port number from 1 to 65535. Default setting 80.

Off : Webserver is deactivated.
4 1 2 3 2 Powador-web

On: The inverter attempts to connect to the Powador-web web
portal.

Off : The connection to Powador web is deactivated.
4 1 2 3 2 Modbus TCP
Activate or deactivate Modbus TCP.

On (Default Status): Activate Modbus TCP.
Defi ne a port number from 1 to 65535. Default setting 502.

Off : Modbus TCP is deactivated.
4 1 2 3
2
Connection status Indicates the status of the network connection:
0 1 2 3 0 “Parameters” menu

Press the right arrow key or the OK key.
NOTICE: The inverter does not display the “Parameters” menu in the
standard confi guration. To display the menu:
1. Open the menu.
2. Simultaneously hold down the up and down keys for several
seconds.