ENG 11
ENG
Same angle
1 1
How to attach the shield:
2
1
3
4
a
As shown in
A
and
2
, align the angles of the
shield release button and the part on the
Shield Ratchet, and set the mechanical part of
the shield on the ratchet as shown in
C
.
b
Insert the shield in the direction of the arrow as
far as it goes, then the shield can be attached.
Follow the same procedure to attach the shield
on the other side.
(
D
The installation of the shield is complete).
Shield Ratchet
Shield
Same angle
Release Button
Hook on shield
mechanism
Hook on shield
mechanism
Hook of Shield
Ratchet
Hook of
Shield
Ratchet
Cover the Shield
Ratchet
First, stop at this
position
Shield
Insert the
shield in
the direction
of the arrow
as far as it goes
CAUTION
●Do
not
push
or
twist
the
shield
by
force
when
installing
it.
Such
action
may
damage the shield and ratchet system.
●After
the
installation
of
the
shield,
be
sure
to
pull
it
lightly
towards
the
removing direction to make sure that it is securely installed.
●After
the
installation
of
the
shield
is
completed,
open
and
close
the
shield
three to four times to make sure that the shield works properl
y
.
WARNING
●After the installation of the shield, make sure the shield is securely installed
and that it is properly opened and closed before riding. If the shield does
not work properl
y
, or is installed insecurel
y
, it may cause a failure in
opening and closing the shield or lead to the removal of the shield while
riding, thereby causing a great risk. If the opening and closing operations
are not properly performed or abnormal noise is heard during the
s
e
operations, check the steps in the installation procedure and repeat the
installation procedure from the start.
●The shield is a consumable item. If the shield surface is damaged by a bug,
stone, etc., it may hinder the vision, thereby causing a great risk.
If the shield gets extremely dirty or scratched, replace it with a new one.
Shield Ratchet
A
Same angle
1 1
How to attach the shield:
2
1
3
4
a
As shown in
A
and
2
, align the angles of the
shield release button and the part on the
Shield Ratchet, and set the mechanical part of
the shield on the ratchet as shown in
C
.
b
Insert the shield in the direction of the arrow as
far as it goes, then the shield can be attached.
Follow the same procedure to attach the shield
on the other side.
(
D
The installation of the shield is complete).
Shield Ratchet
Shield
Same angle
Release Button
Hook on shield
mechanism
Hook on shield
mechanism
Hook of Shield
Ratchet
Hook of
Shield
Ratchet
Cover the Shield
Ratchet
First, stop at this
position
Shield
Insert the
shield in
the direction
of the arrow
as far as it goes
CAUTION
●Do
not
push
or
twist
the
shield
by
force
when
installing
it.
Such
action
may
damage the shield and ratchet system.
●After
the
installation
of
the
shield,
be
sure
to
pull
it
lightly
towards
the
removing direction to make sure that it is securely installed.
●After
the
installation
of
the
shield
is
completed,
open
and
close
the
shield
three to four times to make sure that the shield works properl
y
.
WARNING
●After the installation of the shield, make sure the shield is securely installed
and that it is properly opened and closed before riding. If the shield does
not work properl
y
, or is installed insecurel
y
, it may cause a failure in
opening and closing the shield or lead to the removal of the shield while
riding, thereby causing a great risk. If the opening and closing operations
are not properly performed or abnormal noise is heard during the
s
e
operations, check the steps in the installation procedure and repeat the
installation procedure from the start.
●The shield is a consumable item. If the shield surface is damaged by a bug,
stone, etc., it may hinder the vision, thereby causing a great risk.
If the shield gets extremely dirty or scratched, replace it with a new one.
Shield Ratchet
A
