ENG
ENG 16
1 6
CAUTION
●Flex the shield properly when fitting the Pinlock® Original Insert Lens.
Otherwise, eccentric pins may be damaged.
●Clean the inside of the shield before applying the Pinlock® Original Insert Lens.
Pay attention not to touch the anti-fogging part of the silicon seal side on the
Pinlock® Original Insert Lens.
●Do not use any petroleum products, thinner, glass cleaner, etc. It will degrade
the material of the Pinlock® Original Insert Lens.
●Do not leave the Pinlock® Original Insert Lens where the temperature may
surpass 50
º
C or near a heater, neither use a drier nor fire for drying. Heat may
degrade the material of the Pinlock® Original Insert Lens.
●Pinlock® Original Insert Lens is only for exclusive visors.
●If rain or water drops come in the space between the Pinlock® Original Insert
Lens and the shield, please detach the Pinlock® Original Insert Lens from the
shield and dry them out. Then, reattach the Pinlock® Original Insert Lens on the
shield.
●Please remove the Pinlock® Original Insert Lens at times for maintenance.
Otherwise the silicon seal of the lens would adhere to the shield.
●Do not use any shields or pins other than exclusive ones for the Pinlock®
Original Insert Lens.
●Please be informed that if you are riding with the ventilations closed or using the
Wind Shutter, may cause the Pinlock® Original Insert Lens to become fogged.
●Please replace Pinlock® Original Insert Lens if the anti-fog performance
decreases and/or being scratched.
●Silicon seal may come into view depending on the riding position.
CAUTION *Pinlock® Original Insert Lens
1 6
CAUTION
●Flex the shield properly when fitting the Pinlock® Original Insert Lens.
Otherwise, eccentric pins may be damaged.
●Clean the inside of the shield before applying the Pinlock® Original Insert Lens.
Pay attention not to touch the anti-fogging part of the silicon seal side on the
Pinlock® Original Insert Lens.
●Do not use any petroleum products, thinner, glass cleaner, etc. It will degrade
the material of the Pinlock® Original Insert Lens.
●Do not leave the Pinlock® Original Insert Lens where the temperature may
surpass 50
º
C or near a heater, neither use a drier nor fire for drying. Heat may
degrade the material of the Pinlock® Original Insert Lens.
●Pinlock® Original Insert Lens is only for exclusive visors.
●If rain or water drops come in the space between the Pinlock® Original Insert
Lens and the shield, please detach the Pinlock® Original Insert Lens from the
shield and dry them out. Then, reattach the Pinlock® Original Insert Lens on the
shield.
●Please remove the Pinlock® Original Insert Lens at times for maintenance.
Otherwise the silicon seal of the lens would adhere to the shield.
●Do not use any shields or pins other than exclusive ones for the Pinlock®
Original Insert Lens.
●Please be informed that if you are riding with the ventilations closed or using the
Wind Shutter, may cause the Pinlock® Original Insert Lens to become fogged.
●Please replace Pinlock® Original Insert Lens if the anti-fog performance
decreases and/or being scratched.
●Silicon seal may come into view depending on the riding position.
CAUTION *Pinlock® Original Insert Lens
