ENG 13
ENG
1 3
b
Place the Shield Ratchet in the hollow
space on the side of the helmet and
align the mounting holes on the shield
ratchet with the mounting holes on the
helmet (Fig. 2).
c
Fasten the both Shield Ratchet Screws
clockwise securely. Repeat the same
procedure on the other Shield Ratchet.
Then the Shield Ratchets are installed
(Fig. 3).
Shield Ratchet Screw
Shield Ratchet Screw
Shield Ratchet
Shield Ratchet
Fig. 2
Fig. 3
Screw-inserting
hole
CAUTION
●Do not fasten the Shield Ratchet Screws too tight.
Too much tightening of the screws may damage screws and other parts.
●Fasten
the Shield Ratchet Screws by applying the screwdriver vertically to the
screws. If the screws are fastened by applying a screwdriver diagonally, the
threads may be stripped.
WARNING
●The
Shield Ratchet is an important part for open/close the shield. Install the Shield
Ratchet securely. After the installation is completed, check to see that the shield
can be closed to the lowest position and opened and closed correctly.
●Check
and fasten the Shield Ratchet Screws regularly. Riding with the loosened
Shield Ratchet Screws is very dangerous as the shield may be removed while
riding.
●
The Shield Ratchet Screws are the lock coating screws.
Do
not keep using the
screws when the coating is peeled off and replace a new one.
1 3
b
Place the Shield Ratchet in the hollow
space on the side of the helmet and
align the mounting holes on the shield
ratchet with the mounting holes on the
helmet (Fig. 2).
c
Fasten the both Shield Ratchet Screws
clockwise securely. Repeat the same
procedure on the other Shield Ratchet.
Then the Shield Ratchets are installed
(Fig. 3).
Shield Ratchet Screw
Shield Ratchet Screw
Shield Ratchet
Shield Ratchet
Fig. 2
Fig. 3
Screw-inserting
hole
CAUTION
●Do not fasten the Shield Ratchet Screws too tight.
Too much tightening of the screws may damage screws and other parts.
●Fasten
the Shield Ratchet Screws by applying the screwdriver vertically to the
screws. If the screws are fastened by applying a screwdriver diagonally, the
threads may be stripped.
WARNING
●The
Shield Ratchet is an important part for open/close the shield. Install the Shield
Ratchet securely. After the installation is completed, check to see that the shield
can be closed to the lowest position and opened and closed correctly.
●Check
and fasten the Shield Ratchet Screws regularly. Riding with the loosened
Shield Ratchet Screws is very dangerous as the shield may be removed while
riding.
●
The Shield Ratchet Screws are the lock coating screws.
Do
not keep using the
screws when the coating is peeled off and replace a new one.
