Kabuto avand2, Инструкция по эксплуатации

Страница: 13 / 23

ENG
ENG 12
1 2
6
Remove/Replace Shield Ratchets
Shield Ratchet
Shield Ratchet Screw
How to remove the Shield Ratchet:
Turn the Shield Ratchet Screws on
the Shield Ratchet counterclockwise
using a proper sized flat-blade
screwdriver until the screws are
removed. Then, the shield ratchet can
be removed. Follow the same
procedure to remove the Shield
Ratchet on the other side.
How to install the Shield Ratchet:
a
First, check the side of
the Shield Ratchet as
shown in Fig. 1.
Shield Ratchet
Fig. 1
The “Shield Ratchet” is a part to control the open/close the shield and the function of
the “Single Action Shield System
PATENTED.
”
When the shield is completely removed in the procedure mentioned in 5“Single Action
Shield System
PATENTED.
”, the Shield Ratchet appears.
Right Left
Proper sized
flat-blade screwdriver
Proper sized
flat-blade screwdriver
CAUTION
●Use the proper sized screwdriver to remove the Shield Ratchet Screws. Turn the
screw by applying the screwdriver vertically to the screw. If the improper sized
screwdriver is used or the screw is turned diagonally, the threads may be
stripped.
●Do not lose the removed screws.
●The Shield Ratchet Screws are the lock coating screws. Do not keep using the
screws when the coating is peeled off and replace a new one
1 2
6
Remove/Replace Shield Ratchets
Shield Ratchet
Shield Ratchet Screw
How to remove the Shield Ratchet:
Turn the Shield Ratchet Screws on
the Shield Ratchet counterclockwise
using a proper sized flat-blade
screwdriver until the screws are
removed. Then, the shield ratchet can
be removed. Follow the same
procedure to remove the Shield
Ratchet on the other side.
How to install the Shield Ratchet:
a
First, check the side of
the Shield Ratchet as
shown in Fig. 1.
Shield Ratchet
Fig. 1
The “Shield Ratchet” is a part to control the open/close the shield and the function of
the “Single Action Shield System
PATENTED.
”
When the shield is completely removed in the procedure mentioned in 5“Single Action
Shield System
PATENTED.
”, the Shield Ratchet appears.
Right Left
Proper sized
flat-blade screwdriver
Proper sized
flat-blade screwdriver
CAUTION
●Use the proper sized screwdriver to remove the Shield Ratchet Screws. Turn the
screw by applying the screwdriver vertically to the screw. If the improper sized
screwdriver is used or the screw is turned diagonally, the threads may be
stripped.
●Do not lose the removed screws.
●The Shield Ratchet Screws are the lock coating screws. Do not keep using the
screws when the coating is peeled off and replace a new one