21/37
21
prevent user credential validation and so the
lock will deny access to keypad
programming modes (like date/time setting).
5
1
Enter communication mode by typing:
o
900#
The green led blinks with high pitch sound to
confirm the command and then red and
green leds blink in alternate sequence to
indicate communication mode is activated.
The communication with the maintenance
unit must be established within 15 seconds
2
Click ‘Send’ on the maintenance unit ‘Set
Time’ dialog
Once the time is set, an ‘ok’ dialog box will
be displayed and the lock will respond with a
high pitch sound.
6
Configure the lock using the admin card
1
Enter the lock configuration command
(where valid users will be transferred to
lock via the Admin card):
o
100#
The green led will blink to indicate that it is
waiting for the Admin card.
2
Present the Admin card to the lock
Once the lock reads and processes the
Admin card, the green led will turn on with a
high pitch sound indicating success.
[After exiting the keypad programming mode
as shown on the next step, the lock is now in
(user credential) access mode. A valid ISO
14443A DESFire user card will now operate
the lock].
7
Exit keypad programming mode
Either exit pressing the ‘#’ key or leave the
lock idle for five seconds. In the latter case,
the red led turns on with a low pitch sound to
indicate a timeout.
1
Press ‘#’ key
Green led blinks with high pitch sound
16.2 In Access mode
Step
Sub
Description/Operation
Notes
1
Enter lock keypad programming.
1.1
Start keypad programming mode
o
Press ‘#’ key
1.2
If the lock is configured for PIN and card:
o
Type in PIN
o
Press ‘#’ key
1.3
Present a valid user card having ‘update
using admin card’ privilege to the lock
If programming mode is entered, the green
led turns on along with a high pitch sound.
2
Configure the lock using the admin card
1
Enter the lock configuration command
(where valid users will be transferred to
lock via the Admin card):
o
100#
If the user does not have the ‘update using
admin card’ privilege, access will be denied
(red led low pitch sound). The green led will
blink to indicate that it is waiting for the
Содержание E-Plex 5900
Страница 1: ...E Plex 5900 Card Connect Lock User Guide Beta Version June 2007...
Страница 4: ...4 37 4 17 QUICK LOCK UPDATE 23 17 1 FIRMWARE UPDATE 23 17 2 BOOTLOADER UPDATE 24 APPENDIX 25...
Страница 29: ...29 37 29 Click on Next to continue Click on Install You will see the following screen messages...