Kaba 5140 Series Скачать руководство пользователя страница 53

Страница: 53 / 86

Section 3 - 14

Staking technique

Capping blocks and fixtures are designed to support cores at their waist to prevent sleeves and shells from be-

coming out-of-round. Working without proper equipment and technique can cause deformation resulting in poor

operation, and can void product warranty
• Use original pins and Kaba equipment.

• Do not use excessive force.

• Do not deform or score the shells.

5900 series spring cover small format interchangeable

cores

Place core loaded with pins and springs into the

correct cavity of the 5940-00-3540 staking fixture.

Place the correct spring cover (6-pin length) over

the springs.
Set the staking tool on the cover. Gently tap the cover

flat with a plastic or rawhide mallet. Do not use exces-

sive force. Superlube™ synthetic grease.

Rekeying spring cover cores:

Pry up and discard the spring cover.

Dump the old pins and springs. Repin and stake on a new spring cover.
• Work on a firm bench surface.

• Strike tools gently with a plastic or rawhide mallet.

• Do not use excessive force.

5140 large format interchangeable cores for Corbin Russwin

The 5140 large format interchangeable cores for Corbin Russwin have an A2 system pin stack total of 26.
5140 cores use the

large diameter plug

and require the following components:

A2 system: J series bottom pins and B series top pins

A4 system: K series bottom pins and F series top pins

6140-00-3004 patent bottom pin

3800-00-3005 patent top pin

3800-00-4010 stainless steel tumbler springs

3425-00-2006 mortise / rim / large format interchangeable core spring covers

5400-00-5025 for this kit which would include the following parts (qty's of each

to be determined):

5400-00-4002, lg. active disks (universal key-in-knob and lg. plug large format

interchangeable core's)

5800-00-4010, blocking pins

5400-00-4011, #1 filler

5400-00-4012, #2 filler

5400-00-4013, #3 filler

5400-00-4015, #5 filler
Top load the core in the usual manner. Stake in 6840-00-3540 staking fixture.

• Work on a firm bench surface.

• Strike tools gently with a plastic or rawhide mallet.

• Do not use excessive force.

3400-00-4001

staking tool for

use with all

spring covers

6840-00-3540

staking fixture for

all 5900, 5100 and

5200 series cores

Pinning Interchangeable Cores

Содержание 5140 Series























































































Результаты поиска

Содержание 5140 Series

Отзывы:

Похожие инструкции для 5140 Series

Бренды по названию

Популярные бренды

Kaba 5140 Series, Техническое руководство

Результаты поиска

Содержание 5140 Series

Отзывы:

Похожие инструкции для 5140 Series

Бренды по названию

Популярные бренды