Instruction Manual - G85
21
6.5 INT.T
The INT.T (Integral Time) option is for changing the
base value
for the
PID controller.
This should not be attempted by unauthorized persons. If set at a different level the
controlling principle will be affected.
From the factory it is set to a closely calculated value specific for the model.
CAUTION Do not change the value here. If by mistake any changes are made or doubts
occur if the value are correct please set the REST function in the menu for the
restore of the defaults.
6.6 TI.St
The Ti.St (Time Set) option is for
setting the time.
Follow these steps to navigate in the Ti.St option.
Action
Key
Display
Press and hold UP+DOWN key for
3 seconds to enter the menu.
The option “UNIT” will appear in
the display.
Press DOWN key until the option
"Ti.St." appears in the display.
Press and hold setpoint key to
change values.
While holding the setpoint key in,
press either the arrow UP to
change minutes or arrow DOWN
key to change the hour.
Press and hold UP+DOWN key for
3 seconds to exit the menu.
