14
Read the release notes and installation documentation provided by the operating
system vendor. Be sure to read all the README files or documents provided on the
distribution disks, as these typically note documentation discrepancies or
compatibility problems.
1. Select the appropriate boot device order from the BIOS Boot Setup Menu based on
the OS installation media used. For example, if the OS is distributed on a bootable
installation CD, select USB CD-ROM as the first boot device and reboot the system
with the installation CD in the USB CD-ROM drive
2. Proceed with the OS installation as directed and be sureto select appropriate device
types if prompted. Refer to the appropriate hardware manuals for specific device
types and compatibility modes of JYTEK PXIe products.
3. When installation is complete, reboot the system and setthe boot device order in the
SETUP boot menu accordingly.
2�2�1 Driver Installation
Download requisite drivers, as follows, from http://www.JYTEK.com.
1. Fully install Windows, which contains most standard I/Odevice drivers
2. Install the chipset driver
3. Install the graphic driver
4. Install the Ethernet driver
5. Install the GPIB driver
6. Install the management engine driver
7. Install the PXIe trigger driver
8. Install the USB 3.0 driver
2.2.2 Installation Environment
When preparing to install any equipment described in this manual, see “Chapter: Important
Safety Instructions”.
Only install equipment in well lit areas on flat, sturdy surfaces with access to basic tools
such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and
standoffs are small and easily misplaced.
Recommended Installation Tools
• Phillips (cross-head) screwdriver
• Flat-head screwdriver
• Anti-static wrist strap
• Anti-static mat
JYTEK PXIe-63935 system controllers are electrostatically sensitive and can be easily
