30
Important Safety Instructions
For user safety, please read and follow all instructions,
Warnings, Cautions
, and
Notes
marked in this manual and on the associated device before handling/operating the device,
to avoid injury or damage.
S’il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur
l’appareil , pour éviter des blessures ou des dommages.
• Read these safety instructions carefully
• Keep the User’s Manual for future reference
• Read the Specifications section of this manual for detailed information on the
recommended operating environment
• The device can be operated at an ambient temperature of 50ºC
• When installing/mounting or uninstalling/removing device; or when removal of a
chassis cover is required for user servicing (See “Getting Started” on page 13):
◦ Turn off power and unplug any power cords/cables
◦ Reinstall all chassis covers before restoring power
• To avoid electrical shock and/or damage to device:
◦ Keep device away from water or liquid sources
◦ Keep device away from high heat or humidity
◦ Keep device properly ventilated (do not block or cover ventilation openings)
◦ Always use recommended voltage and power source settings
◦ Always install and operate device near an easily accessible electrical outlet
◦ Secure the power cord (do not place any object on/over the power cord)
◦ Only install/attach and operate device on stable surfaces and/or recommended
mountings
• If the device will not be used for long periods of time, turn off and unplug from its
power source
• Never attempt to repair the device, which should only be serviced by qualified
technical personnel using suitable tools
• A Lithium-type battery may be provided for uninterrupted backup or emergency
power.
Risk of explosion if battery is replaced with one of an incorrect type; please
dispose of used batteries appropriately. Risque d’explosion si la pile est remplacée
par une autre de type incorrect. Veuillez jeter les piles usagées de façon
appropriée.
• The device must be serviced by authorized technicians when:
◦ The power cord or plug is damaged
