4
Video
• DVI output supporting up to 1920x 1200 @ 60 Hz resolution
• VGA output for analog CRT route to DVI-I connector on the faceplate, supporting up
to 2048 x 1536 bpp at 75Hz
• DVI-I connector for dual digital and analog video signal output via the included JYTEK
Y-cable
Hard Drive
Built-in 2.5” 500 GB 7200 RPM SATA hard drive or 120GB SATA solid state driver
I/O Connectivity
Dual Gigabit Ethernet controllers through two RJ-45 connectors with speed/link/active LED
on the faceplate, with upper connector supporting Wake on LAN.
USB
Four USB 2.0 and two USB 3.0 ports on the faceplate.
GPIB
Onboard IEEE488 GPIB controller through Micro-D 25-pin connector on the faceplate.
Trigger I/O
One SMB connector on the faceplate to route an external trigger signal to/from PXI trigger
bus
Dimensions (3-slot 3U PXI module)
3U/3-slot PXI standard
60.5 W x 128.7 H x 213.2 D mm (2.38 x 5.07 x 8.39 in.)
Slot Requirements
System slot (5V VIO PCI bus) and 2 controller expansion slots on chassis/backplane.
32-bit and 5V VIO PCI bus of system slot.
Do not remove the blue key from the PXI-63980 system connector, only the 5V
VIO PCI bus is compatible.
3.3V VIO PCI bus is not.
SEVERE system damage may result.
Weight
0.9 kg (exclusive of packaging)
Environmental
Operating temperature with SSD
0 to 55°C
Operating temperature with HDD
0 to 50°C
Storage temperature
-20 to 70°C
Relative humidity , non-condensing
5 to 95%
