17
2
B
to Clear position
2
B
and wait for 5 seconds, then return the switch to Normal position.
4. Remount the controller into the PXI chassis.
5. Press "Delete" or "F2" to enter the BIOS setup when the splash logo appears.
6. Press "F3" to load Optimized defaults in BIOS setup
7. Modify the system date and time
8. Press "F4" to save configuration and exit
2�3�16 Initiating Backup BIOS Flash
BIOS flash on the PXI-63980 is divided into Backup and Normal sections.
In the event of a system malfunction causing the PXI-63980 to halt or fail to boot, and
clearing the CMOS fails to resolve the issue, the BIOS flash backup switch (see Section
2.3.10 Onboard Connections and Settings) can enable the backup BIOS flash. To initiate
BIOS flash backup, move the switch from Normal position
2
B
to Backup
2
B
Please contact technical support to resolve halting or failure to boot issues caused
by corrupted BIOS.
