14
C
A
B
D
E
Figure 2-4: PXI-63980 Onboard Configuration
A
SATA Connector
B
Clear CMOS switch
C
System Battery
D
BIOS flash backup switch
E
BIOS flash socket
2.3.11 Installation Environment
When preparing to install any equipment described in this manual, please refer to Chapter
C: Important Safety Instructions.
Only install equipment in well lit areas on flat, sturdy surfaces with access to basic tools
such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and
standoffs are small and easily misplaced.
Recommended Installation Tools
• Phillips (cross-head) screwdriver
• Flat-head screwdriver
• Anti-static wrist strap
• Anti-static mat
JYTEK PXI-63980 system controllers are electrostatically sensitive and can be easily damaged
by static electricity. The equipment must be handled on a grounded anti-static mat, and
operators must wear an anti-static wristband, grounded at the same point as the anti-static
mat.
Inspect the carton and packaging for damage. Shipping and handling may cause damage to
the contents. Ensure that all contents are undamaged before installing.
