JYTEK PCIe-69834 Скачать руководство пользователя страница 49

Страница: 49 / 50

Important Safety Instructions

Important Safety Instructions

For user safety, please read and follow all

instructions

WARNINGS

CAUTIONS,

and

NOTES

marked in this manual and

on the associated equipment before handling/operating the
equipment.



Read these safety instructions carefully.



Keep this user’s manual for future reference.



Read the specifications section of this manual for detailed
information on the operating environment of this equipment.



When installing/mounting or uninstalling/removing
equipment:



Turn off power and unplug any power cords/cables.



To avoid electrical shock and/or damage to equipment:



Keep equipment away from water or liquid sources;



Keep equipment away from high heat or high humidity;



Keep equipment properly ventilated (do not block or
cover ventilation openings);



Make sure to use recommended voltage and power
source settings;



Always install and operate equipment near an easily

accessible electrical socket-outlet;



Secure the power cord (do not place any object on/over
the power cord);



Only install/attach and operate equipment on stable
surfaces and/or recommended mountings; and,



If the equipment will not be used for long periods of time,
turn off and unplug the equipment from its power source.

Содержание PCIe-69834



















































Результаты поиска

Содержание PCIe-69834

Отзывы:

Похожие инструкции для PCIe-69834

Бренды по названию

Популярные бренды

JYTEK PCIe-69834, Руководство пользователя

Результаты поиска

Содержание PCIe-69834

Отзывы:

Похожие инструкции для PCIe-69834

Бренды по названию

Популярные бренды