UX-Z7MDR
1-12 (No.22042)
2.1.12 Removing the MD base chassis/the micon board
(See Fig.28 to 30.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, the front panel assembly,
the rear cover, the amp board, and the MD connect board.
Notice
The MD base chassis/the micon board can be removed with-
out removing the MD mechanism assembly.
(1) Remove the wire from the micon board connector CN707
in the center of the right side of the main
body. Remove the card wire from the connector CN708.
(2) Remove the screw
M
on top of the main body that attaches
the MD base chassis.
Notice
The MD mechanism assembly will be kept attached to
the MD base chassis.
(3) Remove the two screws
N
that attach the micon board. Re-
move the two joint "
h
" that fix the MD base chassis.
Fig.28
Fig.29
Fig.30
MD mechanism ass'y
MD base chassis
Micon board
CN707
CN708
MD mechanism ass'y
MD base chassis
M
N
Micon board
joint h