UX-Z7MDR
(No.22042)1-7
2.1.3 Removing the front panel
(See Fig.8 to11.)
• Prior to this procedure, remove the metal cover and the CD
mechanism assembly.
(1) Remove the card wire from the connector CN705 on micon
board, in the center of the right side of the main body.
(2) Remove the plastic rivet in the right side of the main body
that attaches tuner board.
(3) Remove the card wire from the connector CN301 on amp
board in the center of the left side of the main body.
Remove the card wire from the connector CN704 on micon
board.
Remove the wire from each connector CN703 and CN710
respectively.
(4) Remove the card wire from the connector CN452 on FL
connection board on top of the main body.
(5) Remove the two screws
D
on the right and left sides of the
main body that attach the front panel assembly.
(6) Remove the two screws
E
on the bottom of the main body
that attach the front panel assembly.
(7) Remove the joint "
a
" on the bottom of the main body and
the joint "
b
" on the right and left sides respectively by using
a screwdriver. Remove the front panel assembly in the
front direction.
Fig.8
Fig.9
Fig.10
Fig.11
Plastic rivet
Tuner board
Front panel ass'y
D
Micon board
CN705
joint b
D
Micon board
CN704
Front panel ass'y
joint b
CN703
CN710
Amp board
CN301
FL connect board
CN452
Front panel ass'y
Micon board
CN704
CN710
CN703
E
E
joint a
Front panel ass'y