UX-Z7MDR
(No.22042)1-11
2.1.10 Removing the amp board and heat sink
(See Fig.25 and 26.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, the front panel assembly, and the rear cover.
(1) Remove the wire from the connector CN101 and CN102 on
the amp board on the left side of the main body. Remove
the band that fixes the wire. Remove the card wire from the
connector CN303.
(2) Remove the two screws
J
that attach the amp board.
(3) Pull out and remove the connector CN304 and CN305 on
the amp board outward. Remove the two joint "
g
" that fix
the bottom chassis.
Notice
The heat sink will be kept attached to the amp board. The
heat sink can be removed without removing the amp
board.
(4) Remove the three screws
K
that attach the heat sink.
Fig.25
Fig.26
2.1.11 Removing the MD connect board
(See Fig.27.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, and the rear cover.
(1) Remove the card wire from the connector CN601 on the
MD connect board.
(2) Remove the two screws
L
on the rear side of the main body
that attach the MD connect board.
(3) Pull out the connector CN604 on the MD connect board in
the rear direction.
Fig.27
Band
CN102
CN101
joint g
joint g
J
J
Heat sink
Amp board
CN303
CN304
CN305
Amp board
K
K
Heat sink
L
L
CN604
MD connect board
CN601