UX-Z7MDR
1-10 (No.22042)
2.1.8 Removing the MD mechanism assembly
(See Fig.21 and 22.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, and the rear cover.
(1) Remove the card wire from the connector CN601 on the
MD connect board in the rear part of the MD mechanism
assembly.
(2) Remove the four screws
H
on the front side and the rear
side that attach the MD mechanism assembly.
Remove the MD mechanism assembly upward.
Fig.21
Fig.22
2.1.9 Removing the headphone board
(See Fig.23 and 24.)
• Prior to this procedure, remove the metal cover, the CD mech-
anism assembly, and the rear cover.
(1) Remove the wire from the connector CN101 on the amp
board on the left side of the main body.
(2) Remove the band that fixes the wire to the amp board. Re-
move the wire from the two clamps in the bottom chassis.
(3) Remove the screw
I
on the right side of the main body that
attaches the headphone board.
Fig.23
Fig.24
MD connect board
CN601
MD mechanism ass'y
H
H
MD mechanism ass'y
H
H
Headphone board
clamp
Band
Amp board
CN101
Headphone board
I