JVC TK-C685E, Инструкция по эксплуатации

Страница: 55 / 80

55
3
Press the [SET] button
●
The [MASK EDIT] screen is displayed. (A frame
appears at the mask area)
Memo :
●
If the value is set to
A
OFF
B
, you will not be able to enter
the [MASK EDIT] screen.
● A
OUT OF TILT RANGE
B
will be displayed and Mask
setting is unavailable when the tilt position is 40° and
above from the horizontal direction.
●
When [MODE] item is set to
A
OFF
B
,
A
- - -
B
will be
displayed and settings is disabled.
●
Mask No. 1 to No. 8 are all displayed as (
-
) at factory
default.
●
When an edited mask number is selected, the [MASK
EDIT] screen will move to the position that has been set.
4
Set mask area
5
Press the [MENU] button
●
Save the mask settings and return to the top menu
screen ([MASK MODE] screen).
6
Repeat steps
1
to
4
7
Press the [MENU] button
䡵
Level Setting
1
Select [BRIGHT] at the [PRIVATE MASK] screen
●
Move the cursor (
Z
) to the [BRIGHT] item, shift the
[PAN/TILT] lever to the left and right and set the
A
BRIGHT
B
(mask color).
●
The setting value is 0 (black) to 10 (white).
Memo :
●
To avoid accidental view of masked out area, always
check after setting, and if necessary enlarge mask area
according to step
4
[Set mask area].
●
When Mask is set at the [MASK EDIT] screen, the setting
value of the [PRIVATE MASK] screen becomes
A
ON
B
.
●
After Mask settings are complete, individual ON/OFF
settings can be made for Mask No. 1 to No. 8.
●
The private mask function will not function during
initialization after power is switched on.
● A
OUT OF TILT RANGE
B
will be displayed and Mask
setting is unavailable when the tilt position is 40° and
above from the horizontal direction.
●
When adjusting the mask position, release the [PAN/TILT]
lever after the tilt angle has reached the horizontal limit,
followed by lowering the lever again to move only the
private mask upwards. Using this operation enables you
to specify a private mask that is beyond the upper limit of
the tilt angle.
●
[PAN/TILT] lever
(up/down/left/
right) Edits the mask position
Memo :
●
When Tilt has stopped at the
horizontal edge, Mask can be set
horizontally above with the
Increased Tilt operation.
●
[TELE] button
●
[WIDE] button
Adjusts the size of the mask in the
vertical direction
●
[NEAR] button
●
[FAR] button
Adjusts the size of the mask in the
horizontal direction
MASK EDIT No1
<MENU>RETURN
[MASK EDIT] screen
PRIVATE MASK
MODE ON
BRIGHT 4
<
MENU
>
RETURN
<
SET
>
SUB MENU
[PRIVATE MASK] screen