JVC TK-C685E, Инструкция по эксплуатации

Страница: 39 / 80

39
Item Setting value Functions and settings
HOME M.DETECT
●
OFF
ALARM
TRACKING
When the camera is at home position, this item sets the Motion Detect function,
which activates when there is a movement in the video.
The alarm signal will be output from the alarm output terminal.
Note :
●
The Motion Detect function of this unit detects changes in brightness and
movement. As such, depending on changes in the illumination, it may or may
not detect movement of objects having the same color as the background
color. It may be difficult to detect objects with very slow movement. Check the
operating conditions thoroughly beforehand and configure the settings such
that there will not be any misoperation or omission of detection.
●
This function applies to home position screen when [STABILIZER] item is set
to
A
OFF
B
. When [STABILIZER] is set to
A
ON
B
, as the screen is enlarged, it
will also respond to motion of image which is not shown on the screen. This is
the specification of this unit, not a malfunction. (TK-C686E/TK-C686WPE only)
OFF
^
Motion Detect is disabled.
HOME M.DETECT
(ALARM)
^
When there is a movement in the video, alarm signals will be output.
LEVEL –5 to NORMAL to 5
(
●
NORMAL)
This item sets the detection sensitivity.
To lower the sensitivity
B
Decrease the number
To increase the sensitivity
B
Increase the number
Memo :
●
When the detection sensitivity is increased, the camera may also react to the
flickering of fluorescent lightings. Be sure to confirm on the Demonstration
screen after setting.
AREA EDIT..
^
This item sets the non-detection area. (
A
Page 56)
TIME OFF
●
5s
6s, 7s, 8s, 9s, 10s,
15s, 20s, 30s, 60s
This item sets the duration to output alarm signals.
Note :
●
This setting is invalid in a RM-P2580 system. Set in the Alarm Time item of
RM-P2580. (
A
RM-P2580 Instruction Manual)
DEMONSTRATION..
^
This item checks the configured Motion Detect (Alarm) function.
HOME M.DETECT
(TRACKING)
^
This function automatically tracks and shoots moving objects when the camera
is at home position.
[HOME M.DETECT (TRACKING) Setting] (
A
Page 58)
Memo :
●
Motion Detect (Tracking) may be difficult under the following conditions.
●
When multiple moving objects are in the same screen.
●
When there is a flickering light source in the screen.
●
When the speed of the moving object is fast.
●
When the moving object is big or small.
●
When the object has no contrast.
●
Dark images can be improved with the Increased Electronic Sensitivity
function but the response may be slow.
LEVEL –5 to NORMAL to 5
(
●
NORMAL)
This item sets the detection sensitivity.
To lower the sensitivity
B
Decrease the number
To increase the sensitivity
B
Increase the number
RESTART TIME
●
OFF
10s, 20s, 30s,
40s, 50s, 60s,
120s
This item sets the duration to return to the home position when there is no
movement in the images after tracking starts.
DEMONSTRATION..
^
This item checks the configured Motion Detect (Tracking) function.