Getting started
17
English
4
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a GI Jerrold product: Press
0
, then
1
.
For a Sony product:
Press
2
, then
0
.
5
Release DBS.
6
Try operating your DBS tuner or CATV
converter by pressing
.
VCR/DBS.
When your DBS tuner or CATV converter turns on or off, you
have entered the correct code.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
NOTE
• Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
7
Operation
IMPORTANT
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector to
VCR/DBS
.
2 Press
DBS
.
The following buttons are available:
F
VCR/DBS
:
Turns DBS tuner or CATV converter on and
off.
C/–
*:
Changes the channels.
1-10
,
0
,
+10 (100+)
: Selects the channel.
* Be sure to set the Karaoke mode switch to
OFF
before using
C/–
.
For VCR operations
You can operate your VCR using the remote control supplied with
this system.
• Refer also to the instruction manuals supplied with your VCR.
7
To set the manufacturer’s code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press and hold VCR.
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Philips VCR: Press
0
, then
9
.
For an NEC VCR: Press
2
, then
5
.
5
Release VCR.
6
Try operating your VCR by pressing
.
VCR/DBS.
When your VCR turns on or off, you have entered the correct
code.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
NOTE
• Manufacturers’ codes are subject to change without notice. If they are
changed, this remote control cannot operate the equipment.
• Set the codes again after replacing the batteries of the remote control.
7
Operation
IMPORTANT
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector to
VCR/DBS
.
2 Press
VCR
.
The following buttons are available:
F
VCR/DBS
:
Turns VCR on and off.
3
(play button):
Starts playback.
7
:
Stops operation.
8
:
Pauses playback.
¢
:
Fast forwards video tape.
4
:
Rewinds video tape.
REC
:
Press this button together with
3
(play button)
to start recording or together with
8
to pause
recording.
C/–
*: Changes the TV channels on the VCR.
1-10
,
0
:
Selects the channel. (for the JVC’s VCR only)
* Be sure to set the Karaoke mode switch to
OFF
before using
C/–
.
NOTE
When operating a VCR or DBS tuner/CATV converter;
• The source setting of VCR or DBS remains after you have changed
the remote control mode selector to
AUDIO
or
TV
. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to press
VCR
or
DBS
after setting the remote control mode selector.
Manufacturer
Code
Echostar
21
GI Jerrold
01, 02, 03, 04, 05, 06, 07, 08
Hamin/Regal
15, 16, 17, 18
Pioneer
13, 14
RCA
19
Scientific Atlanta
09, 10
Sony
20
Zenith
11, 12
Manufacturer
Code
Manufacturer
Code
JVC
01, 02, 03
Philips
09
Emerson
11, 26
RCA
05, 06
Fisher
29
Samsung
24
Funai
10, 14, 15, 16
Sanyo
21, 22, 23
Gold Star
12
Sharp
27, 28
Hitachi
04
Shintom
30
Mitsubishi
13
Sony
18, 19, 20
NEC
25
Zenith
08
Panasonic
07, 17
TH-M65[US]-04Start.fm Page 17 Friday, June 13, 2003 10:49 AM