background image

4

Safety Warnings

that curtains and other materials do not 

obstruct the ventilation vents.

•  A minimum distance of 5 cm around the 

speaker should be maintained to allow for 

sufficient ventilation.

•  Do not install or place this speaker in a 

bookcase, built-in cabinet or in another 

confined space. Ensure the speaker is well 

ventilated.

Safety
•  Always disconnect the speaker from 

the mains supply before connecting / 

disconnecting other devices or moving the 

speaker.

•  Unplug the speaker from the mains socket 

during a lightning storm.

•  In the interests of safety and to avoid 

unnecessary energy consumption, never 

leave the speaker switched on while 

unattended for long periods of time, e.g. 

overnight, while on holiday or while out of 

the house. Switch it off and disconnect the 

mains plug from the mains socket.

Mains Cable
•  Make sure the speaker or speaker stand is 

not resting on top of the mains cable, as 

the weight of the speaker may damage the 

mains cable and create a safety hazard.

•  If the mains cable is damaged it must be 

replaced by the manufacturer, its service 

agent, or similarly qualified persons in 

order to avoid a hazard.

Interference
•  Do not place the speaker on or 

near appliances which may cause 

electromagnetic interference. If you do, 

it may adversely affect the operating 

performance of the speaker, and cause a 

distorted picture or sound.

Batteries
•  Batteries used in the remote control for 

this speaker are easily swallowed by young 

children and this is dangerous.

•  Keep loose batteries away from young 

children and make sure that the battery 

holder tray is secure in the remote control. 

Seek medical advice if you believe a cell 

•  Read all the instructions carefully before 

using the speaker and keep them for future 

reference.

•  Retain the manual. If you pass the speaker 

onto a third party make sure to include this 

manual.

•  Check that the voltage marked on the 

rating label matches your mains voltage.

Damage
•  Please inspect the speaker for damage 

after unpacking.

•  Do not continue to operate the speaker 

if you are in any doubt about it working 

normally, or if it is damaged in any way - 

switch off, withdraw the mains plug and 

consult your dealer.

Location of Speaker
•  The speaker must be placed on a flat stable 

surface and should not be subjected to 

vibrations.

•  Do not place the speaker on sloped or 

unstable surfaces as the speaker may fall 

off or tip over.

•  The mains socket must be located near the 

speaker and should be easily accessible.

•  This speaker is designed for indoor, 

domestic use only.

Temperature
•  Avoid extreme degrees of temperature, 

either hot or cold. Place the speaker well 

away from heat sources such as radiators or 

gas / electric fires.

•  Avoid exposure to direct sunlight and other 

sources of heat.

Naked Flames
•  Never place any type of candle or naked 

flame on the top of or near the speaker.

Moisture
•  To reduce the risk of fire, electric shock 

or product damage, do not expose this 

speaker to rain, moisture, dripping or 

splashing. No objects filled with liquids, 

such as vases, should be placed on the 

speaker.

•  If you spill any liquid into the speaker, it can 

cause serious damage. Switch it off at the 

mains immediately. Withdraw the mains 

plug and consult your dealer.

Ventilation
•  To prevent the risk of electric shock or 

fire hazard due to overheating, ensure 

SP-AD300_IB.indd   4

17/04/2015   10:41

Содержание SP-AD300





















Отзывы: