JVC SP-AD300, Инструкция по эксплуатации

Страница: 11 / 20

11
Basic Operating
Switching ON / OFF
• Ensure that the plug is switched on at the wall socket, then switch the POWER ON/OFF
switch at the rear of the speaker to the ON position.
• To turn the speaker on, either press the STANDBY button on the remote control or
press the STANDBY button on the speaker. When the speaker is on one of the Source
lights will light up.
• To switch the speaker to standby, either press the STANDBY button on the remote
control or press the STANDBY button on the speaker. The standby mode indicator will
light.
• To completely turn off the speaker, switch the MAINS POWER switch at the rear of the
speaker to the OFF position.
Selecting Modes
• On the speaker, press the SOURCE button repeatedly to toggle between Bluetooth,
iPhone/ iPad / iPod and AUX modes. The LED indicator will light up indicating the
mode chosen.
• On the remote control, press the SOURCE button repeatedly to select either Bluetooth,
iPhone/ iPad / iPod or AUX mode. The LED indicator will light up indicating the mode
chosen.
• NFC mode is selected with the speaker in standby or Bluetooth modes by placing an
NFC device close to (within 10mm) the speaker’s NFC sensor.
If the speaker is idle for approximately 20 mins, it will automatically switch to standby mode.
Adjusting the Volume
When you adjust the volume the LED indicator will blink each time you press a volume
button. When you reach maximum or minimum volume level the LED indicator will flash
every 2 seconds.
• Press the /– buttons on the speaker or remote control to adjust the volume.
• If you wish to switch the sound off, press the MUTE button on the remote control.
The LED indicator next to the mode in use will flash every second. Press the MUTE
button again or the /– button to resume normal listening.
Adjusting the Sound Effect
When you adjust the Bass or Treble the LED indicator will blink each time you press a bass
or treble button.
• Press the BASS +/– button repeatedly on the remote control to adjust the bass level.
• Press the /– button repeatedly on the remote control to adjust the
treble level.
SP-AD300_IB.indd 11 17/04/2015 10:41