JVC SP-AD300, Инструкция по эксплуатации

Страница: 12 / 20

12
Bluetooth® Operation
1. Select BLUETOOTH mode by repeatedly pressing the SOURCE button
on the speaker or on the remote control. The Bluetooth indicator light with flash, this is
showing that its in pairing mode
2. Activate Bluetooth on the device to be connected and select search mode.
3. “SP-AD300” will appear on the list of Bluetooth devices. Type in the password “0000”
if requested.
4. There will be a sound once the connection is complete and the indicator light with stop
flashing.
5. In BLUETOOTH mode the PLAY/PAUSE, /– controls, MUTE button
and / buttons can be controlled using the remote control. Use the controls on
the device for all other functions.
6. You must disconnect the Bluetooth device before it can be paired with another device.
There will be a sound to confirm the disconnection.
If you are trying to pair your speaker to a mobile device and your mobile device shows the message
‘ failed to connect and password is incorrect’, then switch the speaker off at the mains switch, wait 1
minute then switch the speaker back on. Try pairing again using bluetooth or NFC modes.
SP-AD300_IB.indd 12 17/04/2015 10:41