JVC SP-AD300, Инструкция по эксплуатации

Страница: 10 / 20

10
Remote Control Operation Range
• Point the remote control at the
speaker no more than 5 meters
from the remote control sensor
and within 60° of the front of
the speaker.
• Please note that the operating
distance may vary depending
on the brightness of the room.
• Make sure that there is no obstacle between the infrared remote sensor of the speaker and remote
control. If you install the speaker on rack, etc., the remote controllable range may decrease depending
on the thickness or colour of glass door of rack.
• Do not expose the infrared remote sensor to direct sunlight or other strong light, such as inverter
fluorescent light.
30° 30°
Within about 5m
Connecting to the Mains
This speaker was designed to operate with an AC 100-240V power supply. Connecting the
speaker to any other power source may cause damage to the speaker.
1. Unwind the mains cable to its full length.
2. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted
into the mains socket. Switch on at the mains socket.
3. The speaker is now connected and ready to use.
4. To switch the speaker off completely, switch the MAINS POWER switch to the OFF
position or withdraw the mains plug from the mains socket.
SP-AD300_IB.indd 10 17/04/2015 10:41