38
Setting the Dynamic Range
—DYNAMIC RANGE (
4
)
Using the Midnight mode, you
can enjoy a powerful sound at
night even at a low volume level.
7
Setting the Midnight mode:
Select one of the following:
1
: Select this when you want to reduce the dynamic range a
little. The MIDNIGHT MODE indicator lights up on the
display.
2
: Select this when you want to apply the compress effect
fully (useful at midnight). The MIDNIGHT MODE
indicator lights up on the display.
OFF : Select this when you want to enjoy surround with its full
dynamic range (no effect applied). The MIDNIGHT
MODE indicator goes off from the display.
Notes:
• This function is applied only to the main room sources.
• If Line Direct is in use, Midnight mode is temporarily canceled.
• Midnight mode is not valid for the THX Surround modes and
DVD MULTI playback mode.
Preparing for THX Surround Modes—THX (
5
)
On this submenu screen, you can
preset when and how to apply
the THX Surround EX to
playback software when you
press THX ON/OFF button. (See
page 48.)
7
Setting THX Surround EX:
Select one of the following:
AUTO : This unit automatically selects either “THX SURR
EX” or “THX CINEMA” according to the playback
software when you press THX ON/OFF.
• “THX SURR EX” is selected for software encoded
with Dolby Digital EX (only if the Dolby Digital EX
identification mark is recorded on the disc).
• “THX CINEMA” is selected except for the above
case.
ON
: This unit automatically selects either “THX SURR
EX” or “THX CINEMA” according to the playback
software when you press THX ON/OFF.
• “THX SURR EX” is selected for mulitchannel
digital software.
• “THX CINEMA” is selected except for the above
case.
OFF
: When you press THX ON/OFF, “THX CINEMA” is
always selected for any software.
Note:
When “SURR BK SP” is set to “NONE” on the SPEAKER
SETTING submenu, this submenu is not available.
Setting the Surround Sound Output
—SURROUND SPEAKER (
6
)
On this submenu screen, you can
preset which surround speakers
to use to output the surround
sounds (except for the THX
Surround EX, DAP modes, and
DVD MULTI playback mode).
7
Setting the surround speakers to use
Select one of the following:
L/R
: Select this to use only the left and right
surround speakers.
BACK
: Select this to use only the surround back
speakers.
L/R+BACK
: Select this to use both the surround speakers
and surround back speakers.
Note:
When “SURR BACK SP” is set to “NONE” on the SPEAKER
SETTING menu, this submenu is not available.
Setting the Digital Input Terminals
—DIGITAL IN (
7
)
When you use the digital input
terminals, you have to register
what components you have
connected to the digital input
terminals.
7
Setting the component connected to the digital
coaxial terminal
Set the component connected to the digital coaxial (DIGITAL
IN 1) terminal.
• Each time you press
#
(RIGHT) or
@
(LEFT), the digital
component name changes as follows:
1DVD
“
1CD
“
1TV (or 1DBS* )
“
1CDR
“
1MD**
“
1VCR1
“
(back to the beginning)
*
If you have changed the source name from “TV” to “DBS,”
“DBS” appears (see page 25).
**
If you want to connect an MD recorder to the digital input
terminal, change the source name to “MD” from “TAPE” (see
page 25).
DYNAMIC RANGE
MIDNIGHT MODE : OFF
:OPERATE
:BACK
SURROUND SPEAKER
SURROUND SP:L/R
:OPERATE
:BACK
DIGITAL IN
COAXIAL INPUT: 1DVD
OPTICAL INPUT:
2CD 3TV 4CDR 5MD
:OPERATE
:BACK
THX
THX SURR EX : AUTO
:OPERATE
:BACK
EN33-40_RX-DP10VBK[J]_f
01.6.19, 11:35 AM
38
