JVC RX-DP10VBK - AV Receiver Скачать руководство пользователя страница 7

Страница: 7 / 83

Display Window

ANALOG indicator (24)
• Lights up when an analog input (source) is selected.

DIGITAL AUTO indicator (24)
• Lights up when auto digital input (DIGITAL AUTO) is

selected.

Surround/DSP mode indicators
• Indicate the current Surround/DSP mode setting.

TUNED indicator (31)
• Lights up when a station is received.

STEREO indicator (31)
• Lights up when an FM stereo station is received.

AUTO MUTING indicator (32)
• Lights up when the FM station reception mode is set to Auto

Reception mode (AUTO MUTING).

PARAMETRIC EQ indicator (45)
• Lights up when Parametric Equalizer is in use.

ONE TOUCH OPERATION indicator (40)
• Lights up when One Touch Operation is in use.

SPEAKERS 1/2/SUB ROOM indicators (18, 23, 30)
• SPEAKERS: Lights up when any of the speakers connected

to the FRONT 1 SPEAKERS and the FRONT
2/SUB ROOM SPEAKERS terminals is
activated.

• 1/2:

Lights up when the corresponding speakers are
activated for the main room.

• SUB ROOM: Lights up when the front speakers connected to

the SPEAKERS 2/SUB ROOM terminals are
activated for the sub-room.

SLEEP indicator (26)
• Lights up when Sleep Timer is in use.

MIDNIGHT MODE indicator (38)
• Lights up when Midnight Mode is in use.

Speaker indicators and signal indicators (21)
• Speaker indicators: Indicate the activated speakers.
• Signal indicators:

Indicate the incoming channel signals.

Digital signal format indicators (24)
• Indicates the digital signal format of incoming signals.

Main display
• Shows the source name, station frequency, Surround/DSP

mode, etc.

INPUT ATT indicator (24)
• Lights up when Input Attenuator is in use.

VOLUME level indicator
• Indicates the volume level.
• Goes off while muting sounds.

Refer to the pages in parentheses for details.

Front Panel

SPEAKERS 1 button (18, 23)

INPUT MODE/INPUT ATT button (23, 24)

SURROUND ON/OFF button (48)

DSP MODE button (51)

SOUND SELECTOR button (22)

ADJUST MENU button (42)

DOWN button (31, 34, 42)

UP button (31, 34, 42)

SET button (32, 34, 42)

SPEAKERS 2/SUB ROOM button (18, 23, 30)

SUB ROOM CONTROL button (19, 27)

THX ON/OFF button (48)

LINE DIRECT button (25)

FM MODE button (32)

SETUP MENU button (34)

LEFT button (32, 34, 42)

RIGHT button (32, 34, 42)

EXIT button (34, 42)

(STANDBY/ON) button and STANDBY lamp

(18, 19, 20, 27)
• STANDBY lamp lights up in red when main room is turned

on.

;

MAIN ROOM ON/OFF button and lamp (21)
• MAIN ROOM ON/OFF lamp lights up in red when main

room is turned on.

CC CONVERTER button and lamp (25)
• CC CONVERTER lamp lights up in red when CC Converter

is turned on.

Display

DIMMER button (25)

DOOR UP button (18)

MASTER VOLUME control (18, 19, 22, 29)

DOOR DOWN button (18)

PHONES jack (23)

Remote sensor

SUB ROOM ON/OFF button and lamp (19, 27)
• SUB ROOM ON/OFF lamp lights up in red when sub-room

is turned on.

Source selecting buttons (18, 19, 21, 29)
• DVD, DVD MULTI, VCR 1, VCR 2, TV/DBS, VIDEO, CD,

PHONO, TAPE/MD, CDR, FM, AM

Front door

VIDEO input terminals (11)

EN01-16_RX-DP10VBK[J]_f

01.6.19, 0:25 PM

Содержание RX-DP10VBK - AV Receiver




















































































Результаты поиска

Содержание RX-DP10VBK - AV Receiver

Отзывы:

Похожие инструкции для RX-DP10VBK - AV Receiver

Бренды по названию

Популярные бренды

JVC RX-DP10VBK - AV Receiver, Инструкция по эксплуатации

Результаты поиска

Содержание RX-DP10VBK - AV Receiver

Отзывы:

Похожие инструкции для RX-DP10VBK - AV Receiver

Бренды по названию

Популярные бренды