NX-MD1R/NX-MD1
1-31
Reattach the UD base while engaging the four pins
on both sides of the UD base to the notches of the
loading mechanism base and placing the edge
(marked
e"
) of the cartridge holder assembly under
the hook
e
of the loading mechanism base. (
Fig.24
)
Reattach the slide base (R) while fitting the two pins
on another side of the UD base to the slots of the
slide base (R). (
Fig.25
)
8.
9.
Reattach the slide base (L) on the slide base (R)
while fitting the two pins on another side of the UD
base to the slots of the slide base (L) (
Fig.26
). Make
sure the two slots of the slide base (L) are fitted to
the two bosses marked
e'
and tighten the two
screws
E.
(
Fig.27
)
10.
Fit the part
s
of the slide base (R) to
the part
t
on the inward side of the
cam gear rib. (
Fig.26
)
ATTENTION:
To expedite the work, bring up the UD base
slightly when fitting each pin to the appropriate
notch.
Ref:
Fig.24
Fig.25
Fig.26
Fig.27
E
Loading mechanism base
Slide base (R)
Slide base (L)
Pin
Pin
Pin
Pin
Part t
Part s
Hook e"
Hook e"
Hook e
E
Part t
Part s
Slide base (L)
Slide base (R)
Slide base (R)
Cam gear
Boss e'
Boss e'
