NX-MD1R/NX-MD1
1-15
Pull out the saran net toward the front while
disengaging the four joints
a
.
Insert the tip of a flat-bladed screwdriver or a similar
tool into the joints
b
between the main body and the
front cover from the bottom of the main body.
Lift the front cover little by little to remove.
Remove the front cover toward the front and
disconnect the yellow and black wires from the two
tweeter speaker terminals.
1.
2.
3.
4.
Removing the front cover (See Fig.1 to 3)
Note : Avoid replacing individual parts.
Fig.1
Fig.3
Joints a
Joints b
Joints a
Saran net
Fig.2
Front cover
Tweeter speaker
Front cover
<Speaker section>
