JVC MC-8200LU, Руководство по обслуживанию

Страница: 23 / 71

2.11 Auto Disc/Tray Check ON/OFF Setting
On shipping, auto disc/tray checking function is set to ON which automatically checks the discs loaded in the magazine after the
magazine is loaded or unloaded with the power ON. This setting can be switched OFF in the following manner.
1. Changing the setting
While pressing the SELECT switch and the LOAD/EJECT switch located at the side of the LCD, turn the power ON. The operation
mode is alternated between ON and OFF. The default setting is ON (auto check function is activated). With the above operation,
the setting is changed to OFF (auto check function is deactivated).
2. How to check the current setting
· Hold down the MODE switch beside the LCD for more than 5 seconds. The current setting is displayed on the LCD.
3. Others
· This setting is maintained after the power is turned off. Changing the setting requires the operation described in 1.
AUTO DISC CHECK :
ON
AUTO DISC CHECK :
OFF
2-19
2.12 Maintenance and Periodical Check
The following shows an example of a maintenance reference chart when this unit is used with two drives for 50,000 times a year.
Maintenance period differs depending on the using conditions, etc.
^
– – – – –
– – ^ – –
– –
^
– –
^
Item Maintenance Contents
Maintenance Intervals
Grease (See Disassembly view.)
Clean filter
Clean tray
Carrier
U/D Motor Unit
Mail slot
Drives
Air filter unit
Magazine
1
yr
2
yrs
3
yrs
4
yrs
5
yrs
6
yrs
: Replacement.
^
: Maintenance. : Operation check.
Operation check contents
Item Check Contents
Carrier
U/D motor assembly
Mail slot
Drives
Magazines
Presence/absence of abnormal sound or backlash, Roller defect/wear, No defect on carrier FCC cable
Presence/absence of abnormal sound or backlash
Presence/absence of abnormal sound or backlash
Readout speed check using exclusive software
Cleaning of tray in the position where frequently used (wipe off dust)
NOTES:
1) The maintenance and replacement intervals for the CD/DVD library are variable depending on the operating conditions such as the
number of additional optional drives and the frequency of use. It is recommended to replace each drive after every 30,000 disc
loading cycles. To check the operation of the CD/DVD drive, perform recording and playback of the exclusively designed CD/DVD
disc.
2) The service life of the CD/DVD drive is variable depending on the write count (the total time spent in the write mode).
3) Each disc carrier tray should be replaced after every operation count of 10,000 cycles.
An operation refers to each operation cycle of the carrier. When the carrier has pulled out a magazine tray, inserted a disc in it and
then returned it to its original magazine, the operation count becomes 2.
4) When an MC-CF10 optional carrier is used, it is recommended that it should be replaced after 300,000 inversion operations.
The inversion count can be checked as describe in section “11. Access Count” of the instruction manual.