JVC MC-8200LU, Руководство по обслуживанию

Страница: 10 / 71

2.1.7 Removing the Side Panel
<MC-8200U>
1. Remove the eight screws
6
to remove the side panel.
When removing the side panel, unscrew while holding the
side panel with your hands. (To prevent the panel from drop-
ping.)
<MC-8600U>
1. Remove the 16 screws
6
to remove the side panels.
When removing the side panel, unscrew while holding the
side panel by hand. Pay special attention to the upper side
panel. (in order to prevent the panel from being dropped.)
Note:
When removing the U/D motor and magazine sensor PCB,
remove the upper side panel.
2.1.8 Removing the Rear Panel
<MC-8200U>
1. Remove the three rear panels (T), (DH) and (B) by removing
the four screws
7
for each.
<MC-8600U>
1. In the same way as MC-8200U, remove the two rear panels
(DH) and (B).
2. Remove the eight screws
7
to remove the upper rear panel
(T6).
Note:
When removing the power supply unit, chassis PCB or
SCSI PCB, you don’t have to remove the rear panels.
6
6
6
7
7
(T)
(DH)
4 screws
4 screws
7
(B)
4 screws
7
(T6)
8 screws
2-6