40
EN
Setting Up the Camera Using RM-P2580 (continued)
AUTO TRACE Setup
Use the AUTO TRACE screen to set the Auto Trace function,
which stores and reproduces the actions of a manual camera
operation (up to 30 seconds).
1
Select the camera. (
A
RM-P2580
A
INSTRUCTIONS
B
)
CAMERA
button
N
Numeric
key
(Camera Number)
N
ENTER
button
●
The picture of the selected camera is output.
2
Display the MENU screen. (
A
pg. 21, steps
2
to
4
)
MENU
button (3 sec.)
N
Select
A
CAMERA..
B
using the
PAN
lever
N
SET
button.
●
The
A
MENU
B
screen will be displayed.
3
Tilt the PAN lever up or down to move the cursor (
E
) to
A
AUTO PAN/PATROL/TRACE..
B
and press the SET button.
●
The
A
AUTO PAN/PATROL/TRACE
B
screen is displayed.
4
Move the cursor (
E
) to
A
AUTO TRACE SET..
B
and press the
SET button.
●
The
A
AUTO TRACE SET
B
screen is displayed.
5
Set the patrol start position.
Using the
PAN
lever and the
ZOOM
button and
FOCUS
button, set the
camera position at which the Auto Trace function is to be started.
6
Press the SET button (to start memorization of manual
camera operations).
●
Auto Trace starts. Operate the camera using the
PAN
lever, and the
ZOOM
button and
FOCUS
button.
●
The Auto Trace function can memorize camera operations for up to 30
seconds, during this period
A
LEARNING REMAINDER T: **s
B
is
displayed in the screen.
●
Storage finishes automatically after 30 seconds.
●
Perform step
7
only when finishing the storage but before 30 seconds
elapses.
●
Recording time may shorten depending on details of the operation.
(Shortest recording duration is approximately 10 seconds)
7
Press the SET button to end the memorization of manual
camera operations.
●
This ends recording of Auto Trace and a message indicating
A
DATA
SAVED
B
will be displayed.
8
Press the MENU button.
●
The screen returns to the
A
AUTO PAN/PATROL/TRACE
B
menu.
MEMO
●
Saving of auto operations will not be possible when this menu is displayed.
●
Manual Pan Limit remains valid when this menu is displayed.
●
Manual Pan Limit can be set upon exiting this menu without affecting the Auto
Trace operation.
●
Auto Trace allows easy recording of manual operations, but positions may not be
accurately reproduced during playback.
To Start Auto Trace Function
To let the camera execute reproduction of the Auto Trace operation, it is
required to set the Auto Trace function in the
AUTO PAN
button or
AUTO
PATROL
button of the RM-P2580.
A
A
RM. A. PAN KEY
B
(
A
pg. 29) and
A
RM. A. PATROL KEY
B
(
A
pg. 29).
When the button to which the Auto Trace function is set is pressed, the
lamp in the button lights up and Auto Trace reproduction starts.
The Auto Trace reproduction will repeat continually with a pause of 30
seconds between each operation.
To end the Auto Trace reproduction, press the button to which the Auto
Trace function is set again so that the lamp in the button turns off.
SETUP
MENU
SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE
CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO
F-1
F-2
F-3
PAN/TILT
LENS
CAMERA/POSITION
CAMERA
POSITION
REMOTE CONTROL UNIT
RM-P2580
ALARM
POWER
KEY LOCK
MENU button
CAMERA button
SET button
PAN lever
ENTER
button
AUTO PAN button
AUTO
PATROL
button
Numeric
keys
ZOOM button
FOCUS button
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
<
MENU
>
EXIT
<
SET
>
SUB MENU
MENU Screen
AUTO PAN / PATROL / TRACE
AUTO PAN SET..
AUTO PATROL SET..
AUTO TRACE SET..
AUTO PAN / TRACE VIDEO ..
RM . A . PAN KEY
A . PAN
RM . A . PATROL KEY
A . PATROL
<
MENU
>
RETURN
<
SET
>
SUB MENU
AUTO PAN/PATROL/TRACE Screen
AUTO TRACE SET
SET START POSITION
<
MENU
>
RETURN
<
SET
>
LEARN
AUTO TRACE SET Screen
AUTO TRACE SET
SET START POSITION
LEARNING REMAINDER T :
∗ ∗
s
<
MENU
>
RETURN
<
SET
>
END
AUTO TRACE SET Screen
