EN
31
Setting Up the Camera Using RM-P2580 (continued)
PRIVATE MASK Setup
Use the PRIVATE MASK screen to set up the private mask
function, which grays out areas that are not required to be
included in the monitored picture. Up to four private masks
can be set per screen, and up to eight private masks can be
set in total.
1
Select the camera. (
A
RM-P2580
A
INSTRUCTIONS
B
)
CAMERA
button
N
Numeric
key
(Camera Number)
N
ENTER
button
●
The picture of the selected camera is output.
2
Display the MENU screen. (
A
pg. 21, steps
2
to
4
)
MENU
button (3 sec.)
N
Select
A
CAMERA..
B
using the
PAN
lever
N
SET
button.
●
The
A
MENU
B
screen will be displayed.
3
Tilt the PAN lever up or down to move the cursor (
E
) to
A
CAM. FUNCTION 1..
B
and press the SET button.
●
The
A
CAMERA FUNCTION 1
B
screen is displayed.
4
Move the cursor (
E
) to
A
PRIVATE MASK..
B
and press the SET
button.
The
A
PRIVATE MASK
B
screen is displayed.
5
Select the private mask function ON or OFF.
Turn the private mask function on or off by setting the
A
MODE
B
item in
the submenu to ON or OFF (Factory setting: OFF)
6
Select the mask number.
Select the private mask number from MASK No. 1 to No. 8 and move the
cursor to the item
A
MASK EDIT..
B
. A maximum of 4 can be set within one
picture.
If an already set mask number is selected, the (M) mark will be
displayed.
7
Edit the masking area.
●
Move the cursor to
A
MASK EDIT..
B
and press the
SET
button to display
the
A
MASK EDIT
B
screen. (The masked area will be displayed as a
grayed-out area.)
●
Tilt the
PAN
lever to move the grayed-out area to the center of the area
to be masked.
●
Press the
TELE
button and
WIDE
button to set the masked area size.
8
Press the MENU button.
●
The screen returns to the
A
PRIVATE MASK
B
screen.
●
To delete a private mask area, select
A
MASK DELETE..
B
, move the
cursor to
A
DELETE
B
and press the
SET
button. The PRIVATE MASK
menu reappears after the data has been deleted.
●
To cancel deletion, select
A
CANCEL
B
and press the
SET
button.
9
Repeat steps
6
to
8
for each additional mask area.
10
Press the MENU button.
The screen returns to the
A
CAMERA FUNCTION 1
B
menu.
8
CAUTIONS
●
It is not possible to set five or more masks in adjacent areas. (Even
when this is attempted, the masked area that is required to be set will
not be displayed.)
●
MASK cannot be set at lower than approx. 40
°
in the horizontal
direction. (The masks for new settings are not displayed.)
8
CAUTIONS
●
There may be cases, depending on the camera direction and zoom position, in which an object is captured from within the
private mask area. After setting the private mask, be sure to vary the camera direction and zoom position in order to confirm
that the camera does not capture objects from within this area.
●
The Private Mask function cannot be carried out during the initializing process immediately after the power is turned on.
●
When 4 masking areas are set within the same screen, setting of another mask in an adjacent area may fail. In this case,
adjust the angle of view settings.
●
When 4 marks are set on one same screen, the next mark might not be possible to set on the nearest area. In that case, set
the angle of screen again.
SETUP
MENU
SET
SPEED
IRIS
AF
FOCUS
ZOOM
OPEN
FAR
TELE
CLEAR
/HOME
7
4
1
8
0
5
2
9
6
3
ENTER
AUTO
PAN
OPTION
1
OPTION
2
CAMERA
POSI-
TION
AUTO
PATROL
CLOSE
NEAR
WIDE
AUTO
F-1
F-2
F-3
PAN/TILT
LENS
CAMERA/POSITION
CAMERA
POSITION
REMOTE CONTROL UNIT
RM-P2580
ALARM
POWER
KEY LOCK
TELE
button
MENU button
CAMERA button
SET button
PAN lever
WIDE button
ENTER
button
Numeric
keys
CAMERA FUNCTION1
V. PHASE
- - -
POS. TITLE LOC.
UP-L
PRIVATE MASK..
MANUAL DISPLAY
ON
<
MENU
>
EXIT
<
SET
>
SUB MENU
CAM. FUNCTION 1 screen
PRIVATE MASK
MODE
OFF
MASK No.
1 (M)
MASK EDIT ..
MASK DELETE ..
<
MENU
>
RETURN
PRIVATE MASK screen
Already
set.
MASK EDIT
<
MENU
>
RETURN
MASK EDIT screen
