JVC GY-HD250U - 3-ccd Prohd Camcorder, Инструкция по эксплуатации

Страница: 29 / 117

25
STATUS 1
In addition to the information on the STATUS 0 screen, this screen displays the following items.
STATUS 1 Screen
1 2
4
5
9
0
a
8
STATUS 1 Screen
External Image Input Mode (AUX IN)
D V- 6 0 I A U X
3
2
4
5
c
6 7
7 6 b
b
No. Item Contents
1 VIDEO FORMAT display Displays the currently selected video format.
Allows you to select the REC item on the VIDEO FORMAT[1/2] menu screen.
X See page 77.
You can switch this display ON/OFF using the VIDEO FORMAT item on the LCD/VF[3/4] menu screen.
X See page 91.
2 Time Code (TC)/User’s Bits
(UB) indication Indicates the time code (h:m:s:frame) or user’s bits data.
Whether or not to display this item is set with the TC/UB item on the LCD/VF[3/4] menu screen.
X
See page 91.
Whether the time code or user’s bits should be shown is selected with the TC DISPLAY switch inside the
LCD door.
3 Synchronized display with an
external time code generator Lights up when the time code generator of this device synchronizes with the time code input from the TC
IN terminal. Blinks when synchronization is unsuccessful. Turns off If there is no input signal.
4 Remaining tape indication Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3 minutes.
Whether or not to display this item is set with the TAPE REMAIN item on the LCD/VF[3/4] menu screen.
X
See page 91.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be regarded only as a guide.
* When this device is used at low temperatures, it may take a while before the indication of the remaining
tape time appears.
5 Voltage indication (Example) 12.2V: Indicates remaining battery level in 0.1V steps.
Battery voltage and remaining battery are displayed. Select the display method in BATTERY INFO. on the
LCD/VF[3/4] menu screen.
X See page 91.
Anton Bauer battery: Voltage/remaining capacity (%)/remaining time
IDX Endura battery : Voltage/remaining capacity (%)
(Example) Time code TC 00 : 00 : 00 : 00
User’s bits UB FF EE DD 20
Colon (:) when non-drop frame mode
Dot (.) when drop frame mode
e_hd250.book Page 25 Tuesday, October 24, 2006 3:11 PM