JVC GY-HD250U - 3-ccd Prohd Camcorder страница 102 Скачать руководство пользователя

Страница: 102 / 117

MENU SCREENS

OTHERS[2/2] Menu Screen
(Cont’d)

* This is not displayed in VTR mode.

Item

Function/Setting (bold characters indicate initial settings)

DR-HD100 A.OFF*

Selects whether or not to turn OFF the DR-HD100 (HDD unit by FOCUS enhancements) when this device is turned
OFF.

OFF

: Power does not turn OFF.

: Power turns OFF with this device.

MEMO

• The

[

mark is displayed at the upper right of the LCD monitor and viewfinder when the DR-HD100 is con-

nected. If this device is turned OFF before the mark is displayed, power does not turn OFF even if this setting is
ON.

• This setting is canceled and the DR-HD100 does not turn OFF in the following instances.

- 1394 REC TRIGGER item is set to OFF
- VTR mode is set

• When the DR-HD100 power turns off and this device is turned ON again, after 12 seconds, “DR-HD100 power?”

appears on the LCD monitor for 7 seconds.

MENU ALL RESET

Selects whether to reset the menu screen settings to initial settings.
The camera mode and VTR mode menu settings are reset. (The TC PRESET, UB PRESET, and CLOCK ADJUST
settings are not reset.)

CANCEL

: The settings are not reset.

EXECUTE : The settings are reset.

MEMO

• The cursor (

) does not move to this item when the VTR is activated.

• If the current menu settings and the factory settings have different FRAME RATE settings, “REBOOT!” is dis-

played for 3 seconds, this device automatically turns off and then turns on.

PAGE BACK

When the cursor is in this position, press the SHUTTER dial once to return to the OTHERS[1/2] menu screen.

DRUM HOUR

Displays the drum usage time.
Use as an estimate for regular maintenance.
The cursor (

) does not move to this item.

FAN HOUR

Displays the fan motor usage time.
Use as an estimate for regular maintenance.
The cursor (

) does not move to this item.

e_hd250.book Page 98 Tuesday, October 24, 2006 3:11 PM

Содержание GY-HD250U - 3-ccd Prohd Camcorder






















































































































Результаты поиска

Содержание GY-HD250U - 3-ccd Prohd Camcorder

Отзывы:

Похожие инструкции для GY-HD250U - 3-ccd Prohd Camcorder

Бренды по названию

Популярные бренды

JVC GY-HD250U - 3-ccd Prohd Camcorder, Инструкция по эксплуатации

Результаты поиска

Содержание GY-HD250U - 3-ccd Prohd Camcorder

Отзывы:

Похожие инструкции для GY-HD250U - 3-ccd Prohd Camcorder

Бренды по названию

Популярные бренды