PREPARATIONS FOR OPERATION
42
Setting and Displaying the Date
and Time (Cont’d)
Setting the Date and Time
1.
Display the CLOCK ADJUST menu screen.
Select the CLOCK ADJUST item on the TIME/DATE
menu screen.
2.
Set the date and time.
The blinking digit is the one to be set.
1
When the SHUTTER dial is pressed, the blinking digit
moves to the next digit.
2
When the SHUTTER dial is rotated, the value of the
blinking digit changes.
When the SHUTTER dial is rotated upward, the value
becomes higher. When rotated downward, the value
becomes smaller.
3
Repeat the procedure described in
1
and
2
above to
set the day, month, year, hours, minutes.
The digits indicating seconds cannot be set.
4
Press the SHUTTER dial in sync with a time signal to
enter the date and time precisely.
3.
When all the settings are completed, rotate the SHUT-
TER dial to align the cursor with the PAGE BACK item,
and then press the SHUTTER dial.
• The TIME/DATE menu screen returns.
4.
To return to the normal screen, use either of the following
methods.
Press the STATUS button
or
Return to the TOP MENU screen and then select the
EXIT item on the TOP MENU screen before pressing the
SHUTTER dial.
Displaying the Time and Date on the
Screen
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
1.
Display the TIME/DATE menu screen.
1
Select the TC/UB/CLOCK item on the TOP MENU
screen.
2
Select the TIME/DATE item on the TC/UB/CLOCK
menu screen.
2.
Set the TIME/DATE menu screen.
Display of date and time in the various operation modes.
TIME/DATE menu screen
Date
Time (Hour:Min)
CLOCK ADJUST menu screen
• DISPLAY item
: Sets whether or not date and time
should be displayed.
Set to ON to display the indications.
• DISPLAY MODE
item
: Sets the video output mode in
which date and time should be dis-
played.
BARS
: Displayed when outputting the color
bar.
CAM
: Displayed when outputting the color
camera image.
BARS+CAM
: Date and time are always displayed.
• DISPLAY
STYLE item
: Sets the style in which the date and
time are displayed.
DATE+TIME
: Date and time are displayed.
DATE
: Date only is displayed.
TIME
: Time only is displayed.
In Camera mode
: The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
In VTR stop mode
: The last read date and time values
are displayed.
When an HDV/DV sig-
nal is input from the
IEEE1394 connector
: The date and time of the DV input
are displayed in DV format. The
date and time of the internal clock
are displayed in HDV format.
Date
Time
e_hd250.book Page 42 Tuesday, October 24, 2006 3:11 PM
