CONTROLS, INDICATORS AND CONNECTORS
18
Top Section
1
Viewfinder
Displays the camera image and the playback picture.
MEMO
Set the image format for the viewfinder to RGB, compo-
nent, composite, or Y signal in VF SIGNAL on the LCD/
VF[4/4] menu screen.
X
See page 92.
2
Eyepiece
Ensures that ambient light does not reach the viewfinder
screen or falls into the eye of the cameraman.
3
Eyepiece focus ring
You can adjust the focus by turning this ring.
4
Eyepiece mounting ring
You can adjust the position of the eyepiece forward or
backward by loosening this ring.
5
Slide mounting ring
You can adjust the position of the viewfinder left or right by
loosening this ring.
6
Clamp
Attach the microphone cable here.
7
[FOCUS ASSIST] Focus assist button
When you press this button during shooting, the area of
focus is displayed in blue, red or green, making it easy to
focus accurately.
MEMO
• When FOCUS ASSIST on the LCD/VF[1/4] menu screen
is set to ACCU-FOCUS and this button is pressed,
ACCU FOCUS functions with FOCUS ASSIST. This
makes depth of field shallower, making it easier to focus.
• This button has the same function as the FOCUS
ASSIST button
6
in the Right Side Section.
X
See “LCD/VF[1/4] Menu Screen” on page 89.
8
[REC] REC trigger button (start/stop recording)
Start and stop recording using this button.
(This works together with the REC trigger button on the
right panel and the lens VTR trigger button.)
9
[REC LOCK] REC LOCK switch
Slide this switch in the direction of the arrow to lock the
[REC] trigger button
8
. Use this to prevent unwanted
recording.
(The REC trigger button on the right panel and the lens
VTR trigger button are not locked.)
0
SD memory card cover
When you open this cover, you can insert and remove the
SD memory card.
X
See “Inserting an SD Memory Card” on page 34.
When an SD memory card is loaded
• You can save, call up and reset the menu settings on
GY-HD250/GY-HD251.
• You can initialize (format) an SD memory card.
X
See “FILE MANAGE Menu Screen” on page 100.
a
[EJECT] Eject switch and LED
Slide this switch to the side to insert or eject a videocas-
sette tape.
The LED lights while ejecting is in progress.
MEMO
• It takes a few seconds before the videocassette is
ejected. Do not close the cassette cover during the eject
operation.
• Do not touch the cassette insertion slot or cassette dur-
ing the eject operation. This could result in damage.
b
Operation cover
Open this cover when operating in the playback mode.
Otherwise, keep this cover closed.
This cover can be opened by sliding it to the side.
MEMO
When the STOP button
h
is pressed in the Camera mode
to set the VTR operation mode indicator to indicate STOP,
playback operations become possible.
c
Battery adapter
Attach the battery.
U model: Anton Bauer battery
E model: IDX battery
X
See “Battery Operation” on page 37.
1
2
3
4
5
6
7
8
9
0
a
b
c
d
h
i
j
k
e
f
g
l
e_hd250.book Page 18 Tuesday, October 24, 2006 3:11 PM
