EN
95
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
23.
• The Picture Wipe or
Dissolve functions are in use.
• The Squeeze mode is selected
in the Mode Menu.
• A Fade-In or Fade-Out is in
progress.
• Dissolve during 5-second
mode recording is in use.
24.
• When shooting in the dark, the
unit becomes highly sensitive to
light and the image takes on an
effect similar to Slow Shutter.
25.
• The Picture Wipe or Dissolve
function is in use.
• Dissolve during 5-second
mode recording is in use.
26.
• The Sepia or Monotone mode
is activated.
27.
• This is a result of exceedingly
high contrast, and is not a
malfunction.
28.
• This is not a malfunction.
29.
• “DISPLAY” is set to “OFF” in
the Date/Time Menu.
• Interface Shooting is
performed.
30.
• Images stored in the
MultiMediaCard are
protected.
31.
• “ON SCREEN” is set to “OFF”
in the Date/Time Menu.
• You have made the indicators
disappear.
32.
• In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.
• When the LCD monitor’s
fluorescent light reaches the
end of its service life, images on
the LCD monitor become dark.
Consult your nearest JVC dealer.
23.
• Make sure the Squeeze mode
is set to “OFF” (
Z
pg. 34 –
39).
• Do not try to use the Video
Echo mode during a Fade-In or
Fade-Out or when Dissolve is
activated during 5-second
mode recording (
Z
pg. 44,
45).
24.
• If you want the lighting to
look more natural, set GAIN
UP to “AGC” or “OFF” in the
Mode Menu (
Z
pg. 34 – 39).
25.
• Do not try to use the Classic
Film or Strobe mode during a
scene transition (
Z
pg. 44,
45).
26.
• Turn off Sepia or Monotone
before setting White Balance
(
Z
pg. 44, 45).
27.
————
28.
————
29.
• Set “DISPLAY” to “ON” in the
Date/Time Menu (
Z
pg. 26).
• During Interface Shooting, the
date/time does not appear
(
Z
pg. 21).
• Set “INDICATION” to “ON”
in the Date/Time Menu
(
Z
pg. 27).
30.
• Remove protection from the
images stored in the
MultiMediaCard and delete
them (
Z
pg. 62, 64).
31.
• Set “ON SCREEN” to “ON” in
the Date/Time Menu
(
Z
pg. 26).
• Set “INDICATION” to “ON”
in the Date/Time Menu
(
Z
pg. 27).
32.
• Adjust the brightness and
angle of the LCD monitor
(
Z
pg. 21).
23.
The Video Echo mode does
not work.
24.
Even when Slow Shutter is
not selected, the image looks
like it is activated.
25.
There is no strobe when the
Classic Film or Strobe mode
is activated.
26.
White Balance cannot be
activated.
27.
When shooting a subject
illuminated by bright light,
vertical lines appear.
28.
When the screen is under
direct sunlight during
shooting, the screen becomes
red or black for an instant.
29.
During recording, the date/
time does not appear.
30.
Images stored in the
MultiMediaCard cannot be
deleted.
31.
The indicators and messages
do not appear.
32.
Images on the LCD monitor
appear dark or whitish.
CONTINUED ON NEXT PAGE
