JVC GR-DVX7, Инструкция по эксплуатации

Страница: 74 / 112

74
EN
DUBBING
Dubbing Images/Sounds Recorded On A
Tape To Another Tape
1
CONNECT EQUIPMENT
Following the illustration at left, connect the
camcorder and the VCR. Also refer to pg. 70 and 71.
2
PREPARE FOR DUBBING
Set the camcorder’s Power Switch to “ ”, turn
on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
SELECT VCR MODE
Engage the VCR’s AUX and Record-Pause modes.
4
FIND EDIT-IN POINT
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4 / 6
on the camcorder.
5
START EDITING
Press 4 / 6 on the camcorder and engage the VCR’s
Record mode.
6
STOP EDITING TEMPORARILY
Engage the VCR’s Record-Pause mode and press 4 / 6
on the camcorder.
7
EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
●
You can use the AV OUT connector on the camcorder
for connection.
●
You can use Playback Zoom (
Z
pg. 82) or Playback
Special Effects (
Z
pg. 83) in step 5.
●
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do appear
during dubbing, they are being recorded onto the new
tape.
To clear the Playback Sound Mode Display, press
DISPLAY on the RM-V713U remote control (provided).
●
Select “DISPLAY” and “TIME CODE” from the Playback
Menu (
Z
pg. 54) to show or hide the Date/Time and
the Time Code on the recording.
●
To keep all the camcorder’s indications from appearing
on the VCR, set “INDICATION” to “OFF” in the
Playback Menu (
Z
pg. 54) and press DISPLAY on the
remote control.
●
Set the video out select switch of the cable adapter as
required:
Y/C
: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
VCR (Recording deck)
Power Switch
Play/Pause (
4
/
6
) Button
TV
To
S-VIDEO
OUT
S-Video cable
(provided)
Red to
AUDIO
R OUT
* Connect when the S-Video cable is not used.
Yellow to
VIDEO OUT*
White to
AUDIO
L OUT
A/V cable
[RCA plug to RCA
plug] (provided)
If your VCR has the
SCART connector,
use the provided
cable adapter.
To AUDIO,
VIDEO*
and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch