94
EN
TROUBLESHOOTING
(cont.)
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
17.
Program AE with special
effects and Fade/Wipe Effects
do not work.
18.
The Black & White Fader
does not work.
19.
The Dissolve function does
not work.
20.
The Picture Wipe and
Dissolve functions do not
work.
21.
The picture wipe function
doesn’t work.
22.
Scene transition does not go
as expected.
17.
• The Operation Switch is set to
“
” and/or the Power Switch
is set to “5S”.
18.
• The Sepia or Monotone mode
is activated.
19.
• The Sepia, Monotone or Slow
Shutter mode of Program AE
with special effects is
activated.
• The Squeeze mode is
selected.
• The previously selected mode
of Program AE with special
effects was changed after the
last selected scene for editing
was registered.
20.
• The last selected editing scene
is ending.
• At the end of the last selected
scene for editing, the Power
Switch was set to “OFF”.
• The power is off.
21.
• The Slow Shutter mode is
activated.
• The Squeeze or Cinema mode
is selected in the Mode Menu.
22.
• When using “Picture Wipe/
Dissolve” (
Z
pg. 42) or
“Dissolves during 5 second
recording mode” (
Z
pg. 30),
there is a delay of a fraction of
a second between the
previous record stop-point
and the Dissolve start-point.
This is normal, but this slight
delay becomes especially
noticeable when shooting
fast-moving subject or during
rapid panning.
17.
• Set the Operation Switch to
“
” and/or set the Power
Switch to “
” or
“
”.
18.
• Turn off Sepia and Monotone
(
Z
pg. 44).
19.
• Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
(
Z
pg. 44).
• Make sure that the Squeeze
mode in the Mode Menu is
set to “OFF” (
Z
pg. 38).
• Make sure you have selected
the mode of Program AE with
special effects you want
before starting editing
(
Z
pg. 44).
20.
• Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
(
Z
pg. 42).
• Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
Z
pg. 42).
• The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure you
continue operations within 5
minutes after engaging
Record-Standby mode
(
Z
pg. 42).
21.
• Make sure the Squeeze mode,
Cinema mode, or Slow
Shutter mode is not activated
when preparing to use the
Picture Wipe function
(
Z
pg. 38, 45).
22.
————