JVC GR-DVM70 Скачать руководство пользователя страница 79

Страница: 79 / 112

POSITION CAMCORDERS

[For both receiving and transmitting camcorders]

Position the transmitting and receiving camcorders so
that their infrared transmitter and receiver face each
other.

•The distance between them should be less than 1.6

ft. (50 cm) and the transmitter and receiver should
be angled no more than 15˚ to each other.

TRANSMIT IMAGE

[For transmitting camcorder]

Press

START/STOP/TRANS

. Image transmission starts

and the message “TRANSMISSION IN PROGRESS” is
displayed.

RECEIVE IMAGE

[For receiving camcorder]

Rotate

MENU/SET

until “RECEIVE” appears and press

it. Image reception starts and the message “RECEP-
TION IN PROGRESS” is displayed. Reception is
complete when the message disappears.

NOTES:

●

Be sure to supply power from the AC Power Adapter/
Charger instead of the battery pack.

●

[For transmitting camcorder]

•

Be sure to set “IrTran-P” back to “OFF” when the
transmission is finished.

•

An image with a title/frame can also be transmitted.

•

If the message “COMMUNICATION FAILED” is
displayed within approx. 60 seconds after

START/

STOP/TRANS.

is pressed, check the equipment

orientation, power supplies, etc. and retry the
transmission.

•

To abort transmission in the middle, press

START/

STOP/TRANS

. The message “COMMUNICATION

FAILED” is displayed.

●

[For receiving camcorder]

•

If the message “COMMUNICATION FAILED” is
displayed, check the equipment orientation, power
supply, etc. and retry the transmission.

•

“IrTran-P” automatically returns to “OFF” when the
reception is complete or it fails.

MENU/SET Dial

START/STOP/
TRANS. Button

Содержание GR-DVM70
















































































































Результаты поиска

Содержание GR-DVM70

Отзывы:

Похожие инструкции для GR-DVM70

Бренды по названию

Популярные бренды

JVC GR-DVM70, Инструкция по эксплуатации

Результаты поиска

Содержание GR-DVM70

Отзывы:

Похожие инструкции для GR-DVM70

Бренды по названию

Популярные бренды