background image

90

 EN

PLAY/P

C

OF

F

CA

ME

RA

5SD

SC

DSC

PL

AY

T

W

USING THE REMOTE CONTROL UNIT

  (cont.)

Audio Dubbing

The audio track can be customized only when recorded
on the 32 kHz mode (

Z

 pg. 39).

NOTES:

Audio Dubbing is not possible on a tape recorded at
48 kHz, on a tape recorded in the LP mode or on a blank
portion of a tape.

To perform Audio Dubbing while watching in the television,
make connections (

Z

 pg. 70).

1

FIND EDIT-IN POINT

Play back the tape to locate the point where editing
will start, then press 

PAUSE 

(

6

).

2

ENGAGE AUDIO DUB STANDBY

While holding 

A.DUB

 (

e

) on the remote control,

press 

PAUSE 

(

6

). “

6e

” appears.

3

BEGIN DUBBING

Press 

PLAY 

(

4

) , then begin “narrating”.

•Speak into the microphone.

4

PAUSE DURING DUBBING

Press 

PAUSE 

(

6

).

5

STOP DUBBING

Press 

STOP 

(

5

).

NOTES:

Audio dubbing is also possible using an optional microphone,
which should be connected to the provided Audio cable, with
the Audio Cable connected to the external microphone input
connector (MIC) on the Docking Station. The provided Audio
cable reduces interference.

While an optional microphone is connected, the built-in
microphone is disabled.

When editing onto a tape that was recorded at 32 kHz, the old
and new soundtracks are recorded separately.

To select the desired sound for playback, press 

AUDIO

MONITOR 

on the remote control.

If you dub onto a blank space on the tape, the sound may be
disrupted. Make sure you only edit recorded areas.

If feedback or howling occurs during TV Playback, move the
camcorder’s microphone away from the TV, or turn down the
TV’s volume.

Sound is not heard from the speaker during Audio Dubbing. To
hear sound, connect optional headphones to the AV OUT
(headphones) connector.

If you change from 32 kHz to 48 kHz in mid-recording and then
use the tape for Audio Dubbing, it is not effective from the point
where 48 kHz recording began.

During Audio Dubbing, when the tape moves to scenes recorded
in the LP mode, scenes recorded at 48 kHz or a blank portion,
Audio Dubbing stops and “ERROR! REFER MANUAL” appears.

AV OUT
(headphones)
connector

Speaker

DISPLAY

Stereo microphone

RM-V713U
(provided)

STOP

PAUSE

Recording sound

Display

Output sound

32 kHz

FULL SOUND

Original and new tracks are combined and output in stereo.

SOUND 2

New track is output on both “L” and “R” channels in stereo.

SOUND 1

Original track is output on both “L” and “R” channels in stereo.

Audio Dub Standby mode

Power Switch

Remote sensor

External
microphone
input connector

A.DUB

AUDIO

MONITOR

PLAY

Lock Button

Display

Located
beneath
the cover.

Содержание GR-DVM70

















































































































Отзывы: