JVC Connected Cam GY-HC500E, Инструкция по эксплуатации

Страница: 96 / 268

Splitting the Clips Freely
(Clip Cutter Trig)
You can split the clips freely without having to stop
recording during shooting.
1 Assign the “Clip Cutter Trig” function to
any of the user buttons.
(
A
P46 [Assignment of Functions to User
Buttons] )
2 Press the user button that is assigned with
“Clip Cutter Trig” during shooting.
A clip cut icon (
Q
) appears on the display
screen for 3 seconds, and the clip is split.
.
100min
50min
282min
1/ 60
F2. 8
AE
±
0 ND
1 /64
12 :34 : 56
ISO
102400
00: 00: 00.00
5 . 6f t
B 5600 K
4030 20 10 0
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when [Slot Mode] is
set to “Backup
Y
” or “Backup
G
”.
0
This item cannot be used when [Rec Mode] is
set to a value other than “Normal” or “Pre Rec”.
(
A
P160 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
0
When “4K EXT (SSD)”, Exchange (U model) or
MP4 (E model) is selected, the clip cutter
function cannot be used.
Configuring Infrared
Recording
This camera recorder comes with a infrared
recording mode that is suitable for night recording.
Using infrared illumination allows images to be
captured naturally in a pitch-dark environment. It is
recommended for observation of animals without
alerting them or for natural facial expressions
without firing glaring flash light at the subject.
1 Set the [FULL AUTO] switch to “OFF”.
2 Set [Camera Function]
B
[Infrared] to “On”.
A “
I
” icon appears.
Caution :
0
Do not use infrared recording for capturing
strong light sources or heat sources. Doing so
may damage the camera recorder.
Memo :
0
The settings are fixed as followed when it is
configured to “On”.
0
Manual focus
0
ND Filter“OFF”
0
[Camera Function]
B
[Focus]
B
[AF Assist]
and [MF Assist] appear as “---”.
0
All items other than [Color Space] and
[Reverse Picture] under [Camera Process]
appear as “---”.
0
The zoom and focus positions will be initialized
after the settings are changed.
0
When [Infrared] is configured to “On”, if the type
of light source changes after focus is
established, the image may go out of focus.
96
Splitting the Clips Freely (Clip Cutter Trig)
Shooting