JVC Connected Cam GY-HC500E, Инструкция по эксплуатации

Страница: 93 / 268

3 Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“
R
REC
L
”
B
“STBY
L
” (yellow text)).
0
The card slot status indicator remains lighted
in red.
Memo :
0
When the [CANCEL] button is pressed while the
camera recorder is paused (STBY
L
), the
display changes (“STBY
L
” (yellow text)
B
“STBY
L
” (blinking yellow text)
B
“STBY
L
”
(white text)), and a “clip” is generated. The card
slot status indicator lights up in green.
4 Resume recording. (Recording 2)
0
Press the [REC] button again to resume
recording. The display changes (“STBY
L
”
(yellow text)
B
“
R
REC
L
”).
0
The card slot status indicator remains lighted
in red.
5 Pause recording.
0
Press the [REC] button again to pause
recording. The display changes (“
R
REC
L
”
B
“STBY
L
” (yellow text)).
0
The card slot status indicator remains lighted
in red.
6 Resume recording. (Recording 3)
0
Press the [REC] button again to resume
recording. The display changes (“STBY
L
”
(yellow text)
B
“
R
REC
L
”).
0
The card slot status indicator remains lighted
in red.
7 Press and hold the [REC] button.
0
Recording stops and the display changes
(“
R
REC
L
”
B
“STBY
L
”). A “clip” is generated.
0
The card slot status indicator lights up in
green.
8 Press the [REC] button again.
0
The display changes (“STBY
L
”
B
“
R
REC
L
”)
and the card slot status indicator lights up in
red.
0
A new “clip” is generated from here.
Memo :
0
The following operations cannot be performed
while recording is paused (STBY
L
, yellow text).
0
Clip Review operation
(
A
P86 [Viewing Recorded Videos
Immediately (Clip Review)] )
0
Switching SD card slots
0
Switching operation mode
(
A
P24 [Operation Modes] )
0
Files are split into sizes of 4 GB (or 30 minutes)
regardless of the menu settings.
Caution :
0
Do not remove the SD card during recording
(
R
REC
L
, red text) or recording pause (STBY
L
,
yellow text).
0
To remove the SD card in the “Clip Continuous”
mode, press the [CANCEL] button, check that
“STBY
L
” (white text) is displayed and the card
slot status indicator lights up in green before you
remove the card.
0
To remove the SD card in the “Clip Continuous”
mode, press the [CANCEL] button, check that
“STBY
L
” (white text) is displayed and the card
slot status indicator lights up in green before you
remove the card.
0
When the SD card becomes full during
recording, recording stops and “STOP” is
displayed.
0
When the [POWER ON/OFF] switch is turned off
during recording or recording pause, recording
stops and power is cut off after a clip is
generated.
0
If the power is cut off due to low battery power,
a proper clip may not be generated.
Special Recording
93
Shooting