JVC CA-UXJ99DVD Скачать руководство пользователя страница 77

Страница: 77 / 96

English

To turn off the Daily Timer after its setting is done

Press CLOCK/TIMER repeatedly until “DAILY TIMER”
appears on the display.

Press CANCEL.
The (timer) and

DAILY

indicators go off from the display.

To turn on the Daily Timer again

Press CLOCK/TIMER repeatedly until “DAILY TIMER”
appears on the display.

Press SET.
The settings are shown on the display for your confirmation.
The (timer) and

DAILY

indicators light up on the display.

•

If the unit is kept turned on when the start time comes

Daily Timer does not work at all.

•

Daily Timer will be canceled in the following cases:

– When you change the source while Daily Timer is working.
– When you enter the MD editing or title entry mode while Daily Timer

is working.

– When you turn off the Daily Timer (see above).

•

You cannot make Program Play or Random Play for Daily Timer.

Adjust the volume level.

(1) Press cursor

repeatedly to

adjust the volume level.

• You can adjust the volume level to

“– –” or within the range of 0
(silent) to 40 (maximum).

• When you select “VOLUME – –,” the volume is set to the

volume level when you turn off the unit.

(2) Press SET.

The fade setting appears on the display.

Select the fade setting.

(1) Press cursor

repeatedly.

FADE

The volume increases gradually to the level
you have set on step

when the timer-on time

comes.

NO FADE

The volume comes out without fading with the
level you have set on step

when the timer-on

time comes.

(2) Press SET.

The

DAILY

indicator stops flashing and remains lit.

The contents of this setting appear on the display
for your confirmation.

Press

AUDIO to turn off the unit if

you have set the timer with the unit
turned on.

DAILY

Before the start time, the

DAILY

indicator and “DAILY TIMER

STANDBY!” start flashing on the display.

Before the shut-off time, the

DAILY

indicator and “DAILY

TIMER OFF!” start flashing on the display.

DAILY

Clock indication

EN71-75_UX-J99DVD[UB]5.p65

03.12.12, 11:06 PM

Содержание CA-UXJ99DVD

































































































Результаты поиска

Содержание CA-UXJ99DVD

Отзывы:

Похожие инструкции для CA-UXJ99DVD

Бренды по названию

Популярные бренды

JVC CA-UXJ99DVD, Инструкция по эксплуатации

Результаты поиска

Содержание CA-UXJ99DVD

Отзывы:

Похожие инструкции для CA-UXJ99DVD

Бренды по названию

Популярные бренды