44
English
RIGHT
PCM/
STREAM
PCM
LEFT
AUDIO
DVD OPTICAL
DIGITAL
OUT
OPTICAL
DIGITAL
IN
4
Adjust the volume level to your desired listening
level.
5
Apply sound effects, if you wish.
• For how to apply sound effects, see pages 11 and 12.
To adjust the Audio Input Level
If the sound from the component connected to the AUX jacks is too
loud or is not loud enough when changing from another source to
“AUX,” you can change the audio input level through the AUX jacks
(without changing the volume level).
On the remote control ONLY:
Press and hold SET for more than 2 seconds
while the source is “AUX.”
• Each time you press and hold the button, the audio input level
alternates between “LEVEL 1” and “LEVEL 2.”
LEVEL 1
:
Select this when the sound is too loud (initial
setting).
LEVEL 2
:
Select this when the sound is not loud enough.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
Each time you press the button, the information on the
display alternates between the source indication and
the clock indication.
Listening to External Equipment
You can listen to external equipment connected to the AUX jacks
and OPTICAL DIGITAL IN terminal on the rear of the unit.
• First make sure that the external equipment is properly connected
as follows (see also “Connecting Other Equipment” on page 9):
DO NOT connect other equipment while the
power is on.
1
On the remote control:
Press FM/AM/AUX repeatedly until
“AUX” (for AUX jacks) or “AUX-
DIGITAL” (for OPTICAL DIGITAL IN
terminal) appears on the display.
• Each time you press the button, the source changes as follows:
On the unit:
Press AUX.
• Each time you press the button, the source
alternates between “AUX” and “AUX-DIGITAL”
on the display.
2
Turn down the volume level to “VOLUME MIN.”
3
Start playing the external equipment.
• For operation of the external equipment, refer to the manuals
supplied with it.
To AUX jacks
(On the remote control)
(On the unit)
Listening to External Equipment
To audio output
VOLUME
+
–
AUX
FM/AM
External equipment
To digital audio
output
To OPTICAL DIGITAL
IN terminal
FM
AM
AUX
AUX-DIGITAL
EN43-44_UX-J99DVD[UB]5.p65
03.12.12, 11:04 PM
44
