Justin JED650, Руководство пользователя

Страница: 5 / 36

Drum stand assembly
1.Set up the drum stand. Different model has different configuration
2.Put the long cymbal tube/short cymbal tube/L shape pad rod into the drum stand.
( )
3.Put the pads/cymbal/module to the relative position.
1
CRASH RIDE
HI-HAT
TOM1 TOM2
KICK
SNARE
HI-HAT CONTROL
MODULE
TOM3
TOM 4
CRASH 2
long cymbal tube
L shape pad rod
short cymbal tube
long cymbal tube
L shape pad rod
short cymbal tube
CRASH
RIDE
HI-HAT
TOM1 TOM2
KICK
SNARE
HI-HAT CONTROL
MODULE
TOM3
TOM 4
CRASH 2
Connection
Note
When connecting the pads and audio source box, turn off the power switch
please, otherwise it will destroy the drum kit!
Connecting the pads and module
2
1.SKD200/210/220/230 configuration:
SKD200/210 configuration:TOM1-3(dual CH),SNARE( ),KICK( ),HI-HAT
(mono),RIDE(dual CH),CRASH(dual CH),HI-HAT CTRL
dual CH mono
SKD220/230 configuration:TOM1-4(dual CH),SNARE(dual CH),KICK(mono),HI-HAT
(mono),RIDE(dual CH),CRASH1and CRASH2(dual CH),HI-HAT CTRL
Use the pad cable and connect one end with pad and the other with DSP of module, then
tight it.
JED650 configuration:
TOM1-3(dual CH), SNARE( dual CH), KICK(mono ), HI-HAT (mono),
RIDE(dual CH), CRASH(dual CH), HI-HAT CTRL.