Justin JED650, Руководство пользователя

Страница: 11 / 36

2.Connect the computer via MIDI port
MIDI IN: receiver MIDI signal of computer or other devices.
MIDI OUT: send pad performance signal to external MIDI devices or computer.
MIDI connector:
If you're using an external MIDI keyboard or pads to control the digital drum, make
connections as shown. Here, it is used as a sound module.
Connect with a MIDI keyboard
Make sure the power is switched OFF. Connect the power adaptor to the DC IN jack on the side panel.
After confirming that all connections have been completed, rotate the volume knob to the left (minimum
volume level) before switching the power on. Set the power switch to the
“
ON
”
position. The KIT
indicator on LCD will light up and the display will show kit number 01 pop 01.
Note:
Make sure the power is switched OFF when
connecting the drum module with external devices.
Power supply and switch
7
Basic operating
Selecting a drum kit
after powering up, the digital drum will be in kit menu (kit indicator on ). the display should
look like the following figure. there are 3 ways to activate the drum kit menu:
KIT01 POP01
SONG01 DRUM ON
CLICK=4/4 TEMPO=100
1.Use the direction key to select drum kit.41 sets of drum kits in all.
20 sets of preset drum kits:KIT01---26
15 sets of user drum kits: USER01---15
2.Pressing the Pad Select buttons allows you to preview the
current kit (fixed tempo).
8
ON / OFF